Autofocus Metering Methods; Multi-Field Metering; Spot/Field Metering - Leica Q2 MONOCHROM Instruction Manual

AUTOFOCUS METERING METHODS

EN
The AF mode offers various metering methods for focusing. A
successful focus setting is identified by a green metering field, an
unsuccessful one is shown in red.
Factory setting:
Multi-Field Multi-Field
▸ Select in the main menu
Focusing Focusing
▸ Select
AF Mode AF Mode
▸ Select the desired setting
( , ,
Multi-Field Multi-Field Spot Spot Field Field
Note
• AF focusing can be unsuccessful:
– If the distance to the object is too great (macro mode) or too
small
– If the object is not sufficiently illuminated
70
, )
Face Detection Face Detection

MULTI-FIELD METERING

Several metering fields are detected automatically. This function is
particularly useful for snapshots.

SPOT/FIELD METERING

Both methods detect only those parts of the object that are within
the relevant AF metering fields. The metering fields are indicated
by a small frame (field metering) or a cross (spot metering). The
very small measuring range for spot metering allows focusing on
tiny details of the subject.
The slightly larger measuring range in field metering is less critical
for focusing, but still permits selective metering.
These metering methods can also be used for serial exposures in
which the part of the object you want to focus on will always be at
the same off-center position in the image.
Simply move the AF metering field to another position.
▸ Press the directional pad left or right as needed
or
▸ Briefly tap the LCD panel
(while Touch AF is activated)
Note
• In both cases, the metering fields remain at their last positions
set, even if the metering method is changed or the camera is
switched off.