Time Zone; Daylight Saving Time; Power Save Mode (Standby Mode); After A Few Seconds - Leica Q2 MONOCHROM Instruction Manual

TIME ZONE

▸ Select in the main menu
Date & Time Date & Time
▸ Select
Time Zone Time Zone
▸ Select your time zone/current location
– The Greenwich Mean Time offset is shown on the left of the
line
– Major cities in the relevant time zones are shown on the right

DAYLIGHT SAVING TIME

▸ Select in the main menu
Date & Time Date & Time
▸ Select
Daylight Saving Time Daylight Saving Time
▸ Select /
On On Off Off

POWER SAVE MODE (STANDBY MODE)

The camera will switch to the power-saving standby mode after a
preset time to extend battery life if this function is activated.
The device has three power save levels.
– Activates device standby mode in seconds
– Activates device standby mode in minutes
– Automatic LCD panel shutdown (see p. 58)

AFTER A FEW SECONDS

The camera will switch to standby mode within a few seconds to
maximize battery capacity.
Factory setting:
Off Off
▸ Select in the main menu
Power Saving Power Saving
▸ Select
Power Saving Mode Power Saving Mode
▸ Select the desired setting
( , , , )
Off Off 3 s 3 s 5 s 5 s 10 s 10 s

AFTER A FEW MINUTES

Factory setting:
2 min 2 min
▸ Select in the main menu
Power Saving Power Saving
▸ Select
Auto Power Off Auto Power Off
▸ Select the desired setting
( , , , )
Off Off 2 min 2 min /5 min /5 min /10 min /10 min
Note
• The camera can be woken from standby mode at any time by
pressing the shutter button or by switching the main switch off
and on again.
EN
55