Direct Access To Menu Functions - Leica Q2 Instruction Manual

DIRECT ACCESS TO MENU FUNCTIONS

EN
You can assign specific menu functions to the following operating
elements for extra quick direct access to menu items in recording
mode. The available functions are shown in the list on p. 148.
15
13
Zoom/Lock button
15
button
FN
46
5
13
4
5
Thumbwheel button
4
Thumbwheel
DYNAMIC DIRECT ACCESS
The two following buttons additionally allow a quick assignment of
menu functions from a custom list of items.
– button (factory setting:
FN
Self Timer
– Thumbwheel button (factory setting:
Creating the custom list
▸ Select in the main menu
Customize Control
▸ Select /
FN button Right setting wheel button
▸ Select or for each menu item
On Off
• You can activate a maximum of 8 menu items for this list.
Changing the assignment via the custom list
▸ Press and hold the button/thumbwheel button
FN
• The direct access list you have created will appear on the LCD
panel.
• This list can be modified at any time via the menu item
.
Customized Control
▸ Select the menu item you want by pressing the center button
• You will not be prompted to acknowledge your selection. The
change is applied immediately.
Accessing the assigned menu function
▸ Press the button/thumbwheel button briefly
FN
• The submenu appears on the LCD panel.
• Settings can be done via key control or using gesture control
on the LCD panel.
)
)
ISO
in the submenu