WATSON Verve Product Installation

WATSON DESKING
Step 2
Attach legs next. Align holes in leg
brackets to the threaded inserts in
desk. Attach legs to desk with
1/4-20 x 3/8" machine screws
provided (FIG-2).
FASTENER KEY
3/4"
3/8"
Page 1 of 2
800.426.1202
#10 x 3/4"
wood screw
1/4-20 x 3/8"
machine screw
www.watsondesking.com
PRODUCT INSTALLATION:
Desk Assembly
Step 1
Place support tube on bottom
of desk. Place two brackets
(WFG# 500800F) on stiffener
tube and align to pilot holes.
Attach using #10 x 3/4" wood
screws provided (FIG-1).
Note:
On the 84" wide desks, the
3 brackets are replaced by
one bracket (WFG# 490155F)
that spans the length of the
support tube.
INS30100
M2
M2