Cooperation Between The Ldap Server And Users - Epson ES-580W User Manual

Preparing to Scan over a Network
1. Start Epson Device Admin.
2. Select Devices on the side bar task menu.
3. Select the device you want to configure from the device list.
4. Click Device Configuration on the Home tab on the ribbon menu.
When the administrator password has been set, enter the password and click OK.
5. Click Common > Contacts.
6. Click Browse on Import.
7. Select the file you want to import and then click Open.
When you select the binary file, in Password enter the password you set when exporting the file.
8. Click Import.
The confirmation screen is displayed.
9. Click OK.
The validation result is displayed.
❏ Edit the information read
Click when you want to edit the information individually.
❏ Read more file
Click when you want to import multiple files.
10. Click Import, and then click OK on the import completion screen.
Return to the device's property screen.
11. Click Transmit.
12. Click OK on the confirmation message.
The settings are sent to the scanner.
13. On the sending completion screen, click OK.
The scanner's information is updated.
Open the contacts from Web Config or scanner's control panel, and then check that the contact is updated.

Cooperation between the LDAP Server and Users

When cooperating with the LDAP server, you can use the address information registered to the LDAP server as the
destination of an email.
>
Making Contacts Available
90
>
Cooperation between the LDAP Server
...