Export The Settings; Import The Settings - Epson ES-580W User Manual

Administrator Information

Export the settings

Export the setting for the scanner.
1. Access Web Config, and then select the Device Management tab > Export and Import Setting Value >
Export.
2. Select the settings that you want to export.
Select the settings you want to export. If you select the parent category, subcategories are also selected.
However, subcategories that cause errors by duplicating within the same network (such as IP addresses and so
on) cannot be selected.
3. Enter a password to encrypt the exported file.
You need the password to import the file. Leave this blank if you do not want to encrypt the file.
4. Click Export.
Important:
c
If you want to export the scanner's network settings such as the device name and IPv6 address, select Enable to
select the individual settings of device and select more items. Only use the selected values for the replacement
scanner.
Related Information
"Running Web Config on a Web Browser" on page 26
&

Import the settings

Import the exported Web Config file to the scanner.
Important:
c
When importing values that include individual information such as a scanner name or IP address, make sure the
same IP address does not exist on the same network.
1. Access Web Config, and then select the Device Management tab > Export and Import Setting Value >
Import.
2. Select the exported file, and then enter the encrypted password.
3. Click Next.
4. Select the settings that you want to import, and then click Next.
5. Click OK.
The settings are applied to the scanner.
> >
Backing Up the Settings
199
Import the settings