Epson ES-580W User Manual page 63

Specifications of Originals and Placing Originals
3. Load the originals at the center of the input tray in descending order of paper size with the widest at the back
and the narrowest at the front.
Important:
c
Check the following points when setting different sizes of originals.
❏ Slide the originals with their leading edges aligned, until they meet resistance in the ADF.
❏ Set the originals at the center of the input tray. Refer to the
❏ Set the originals straight.
If not, originals may be fed askew or jammed.
Note:
Load the originals into the input tray facing down and slightly displace the top edges at an angle facing into the ADF.
4. Slide the edge guides to fit the edges of the widest original.
>
Placing Originals
u
mark on the scanner as your guide.
63
>
Mixture of Originals