Disabling The External Interface - Epson ES-580W User Manual

Administrator Information
Logging on to the Scanner from a Computer
When you log in to Web Config as an administrator, you can operate items that are set in the Lock Setting.
1. Enter the scanner's IP address into a browser to run Web Config.
2. Click Administrator Login.
3. Enter the user name and administrator password in User Name and Current password.
4. Click OK.
The locked items and Administrator Logout are displayed when being authenticated.
Click Administrator Logout to log off.
Note:
When you select ON for the Device Management tab > Control Panel > Operation Timeout, you log off automatically
after a specific length of time if there is no activity on the control panel.
Related Information
"Running Web Config on a Web Browser" on page 26
&

Disabling the External Interface

You can disable the interface that is used to connect the device to the scanner. Make the restriction settings to
restrict scanning other than via network.
Note:
You can also make the restriction settings on the scanner's control panel.
PC Connection via USB : Settings > Basic Settings > PC Connection via USB
1. Access Web Config and select the Product Security tab > External Interface.
2. Select Disable on the functions you want to set.
Select Enable when you want to cancel controlling.
PC Connection via USB
You can restrict the usage of the USB connection from the computer. If you want to restrict it, select Disable.
3. Click OK.
4. Check that the disabled port cannot be used.
PC Connection via USB
If the driver was installed on the computer
Connect the scanner to the computer using a USB cable, and then confirm that the scanner does not scan.
If the driver was not installed on the computer
Windows:
>

Disabling the External Interface

196