Epson ES-580W User Manual page 86

Preparing to Scan over a Network
Destination Setting Items
Items
Common Settings
Name
Index Word
Type
Assign to Frequent Use
Email
Email Address
Network Folder (SMB)
Save to
User Name
Password
FTP
Secure Connection
Save to
User Name
Password
Connection Mode
Port Number
Certificate Validation
>
Making Contacts Available
Settings and Explanation
Enter a name displayed in the contacts in 30 characters or less in Unicode (UTF-8).
If you do not specify this, leave it blank.
Enter words to search in 30 characters or less in Unicode (UTF-8). If you do not
specify this, leave it blank.
Select the type of the address that you want to register.
Select to set the registered address as a frequently used address.
When setting as a frequently used address, it is displayed on the top screen of
scan, and you can specify the destination without displaying the contacts.
Enter between 1 and 255 characters using A-Z a-z 0-9 ! # $ % & ' * + - . / = ? ^ _ { | }
~ @.
\\"Folder path"
Enter the location where the target folder is located between 1 and 253 characters
in Unicode (UTF-8), omitting "\\".
Enter a user name to access a network folder in 30 characters or less in Unicode
(UTF-8). However, avoid using control characters (0x00 to 0x1f, 0x7F).
Enter a password to access a network folder in 20 characters or less in Unicode
(UTF-8). However, avoid using control characters (0x00 to 0x1f, 0x7F).
Select FTP or FTPS according to the file transfer protocol the FTP server supports.
Select FTPS to allow the scanner to communicate with security measures.
Enter the server name between 1 and 253 characters in ASCII (0x20-0x7E),
omitting "ftp://" or "ftps://".
Enter a user name to access an FTP server in 30 characters or less in Unicode
(UTF-8). However, avoid using control characters (0x00 to 0x1f, 0x7F). If the server
allows anonymous connections, enter a user name such as Anonymous and FTP. If
you do not specify this, leave it blank.
Enter a password to access to an FTP server within 20 characters or less in Unicode
(UTF-8). However, avoid using control characters (0x00 to 0x1f, 0x7F). If you do not
specify this, leave it blank.
Select the connection mode from the menu. If a firewall is set between the
scanner and the FTP server, select Passive Mode.
Enter the FTP server port number between 1 and 65535.
The FTP server's certificate is validated when this is enabled. This is available when
FTPS is selected for Secure Connection.
To set up, you need to import the CA Certificate to the scanner.
86
>
Registering a Destination to Contacts u
...