Restricting Features Available For Users; Changing The Administrator Password In Web Config - Epson ES-C220 User Manual

• Password: If there is a "Password" label attached to the back of your product, enter the 8-digit
number shown on the label. If there is no "Password" label, enter the serial number shown on the
label attached to your product.
6. Click OK.
You see the available Web Config utility options.
Parent topic:
Related tasks
Determining the Product's IP Address
Checking Status Information

Restricting Features Available for Users

Follow the instructions in these sections to restrict users from using certain product features and create
an administrator password to lock the restrictions using the Web Config software.

Changing the Administrator Password in Web Config

Locking the Buttons on the Control Panel using Web Config
Disabling the External Interface
Disabling Network Scanning
Disabling WSD Scan
Parent topic:
Changing the Administrator Password in Web Config
You can set an administrator password using your product's control panel, Web Config, or EpsonNet
Config. You use the same administrator password in all cases.
Note: If you forget your administrator password, contact Epson for support.
1. Access Web Config and select the Product Security tab.
2. Select Change Administrator Password.
3. Enter a user name, if necessary.
4. Do one of the following:
• If you have set an administrator password before, enter the current password, then enter and
confirm the new password in the fields provided.
Administering Your Product (ES-C320W/RR-400W)
Administering Your Product (ES-C320W/RR-400W)
175