Bluetooth Operation - Jensen JCR-298 User Manual

Bluetooth digital am/fm dual alarm clock radio with usb charging port

Hide thumbs

Table Of Contents

Table of Contents

To set / recall the radio presets:

The unit allows you to store up to 10

any time.

1. If you repeatedly tap the SOURCE/STANDBY BUTTON (#2), you will step through

the different modes available:

2. Tap the SOURCE/STANDBY BUTTON (#2) repeatedly to select either FM or AM

radio mode.

3. Tap the SKIP BACKWARD

(#6)

to select the desired station.

4. Press and hold the PAIR / PRESET BUTTON (#8) until "PXX" shows on the LED

DISPLAY (#11).

5. Tap the SKIP BACKWARD

(#6)

to select a preset number (P01-P10).

6. Press the PAIR / PRESET BUTTON (#8) again to confirm the preset.

7. Repeat steps 2 through 6 to preset up to 10 stations.

8. To recall one of the preset stations already programmed, tap the PAIR / PRESET

BUTTON (#8) repeatedly until you reach the desired preset number/radio station.

9. You can also recall one of the preset stations by pressing the PAIR / PRESET

BUTTON (#8) once and then press the SKIP BACKWARD

SKIP FORWARD

Pairing a Bluetooth enabled device with the JCR-298.

1. Tap the SOURCE/STANDBY BUTTON (#2) to turn the unit on.

2. If you repeatedly tap the SOURCE/STANDBY BUTTON (#2), you will step through

the different modes available:

3. Tap the SOURCE/STANDBY BUTTON (#2) repeatedly to select Bluetooth mode.

4. "bt" will show on the LED DISPLAY (#11) and the Bluetooth

and flash.

5. Turn on the Bluetooth function of your device and enable the search or scan

function to find the JCR-298.

6. Select the JCR-298 from the device list when it appears on your device's screen. If

required, enter the pass code "0000" to pair (link) the JCR-298 with your device.

7. If you are pairing (linking) your computer to the JCR-298 using Bluetooth, you may

need to set the JCR-298 as your computer's default sound device.

8. After pairing the JCR-298 with your Bluetooth device successfully, The Bluetooth

indicator will light steadily.

If you want

the

JCR-298 to pair with another Bluetooth device, press and hold the

PAIR / PRESET BUTTON (#8) until the Bluetooth

go into Pairing/Discoverable mode.

10.

Repeat steps 4 & 5.

Now you can play music from your Bluetooth device wirelessly to

Select a song and press the Play/Pause Button on your Bluetooth device or

PLAY/PAUSE

playback.

Tap the SKIP BACKWARD

(#6)

to select the Previous or Next track.

Slowly adjust both the volume controls on the JCR-298 and on the Bluetooth device

until you reach a comfortable listening level.

stations and 10 AM stations for easy recall at

FM Radio -> AM Radio -> Bluetooth (bt) - > AUX

BUTTON (#5) or SKIP FORWARD

BUTTON (#6)

to select a preset station.