R&G FP0237 Fitting Instructions

Fork protectors to fit kawasaki z-h2 2020-

Page 1 of 5

FP0237

FITTING INSTRUCTIONS FOR FP0237 FORK PROTECTORS

TO FIT KAWASAKI Z-H2 2020-

This kit contains the items pictured and labelled over page.

Some parts may be shown for clarity of instructions only.

Do not proceed until you are sure all parts are present.

Please read all instructions before proceeding.

IF IN ANY DOUBT WHEN FITTING OUR PRODUCTS, CONSULT ONE OF OUR DEALERS

OR HAVE FITTED BY A QUALIFIED TECHNICIAN.

Please note that the way the kit is packed does not necessarily represent the way of

mounting to the bike.

In the event of rubber washers being used to hold components onto bolts,

these rubber washers can be thrown away.

DIGITAL COPIES OF THESE INSTRUCTIONS ARE AVAILABLE FROM

WWW.RG-RACING.COM

R&G

Unit

, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ

Tel: +44 (0)

420 89007 Fax: +44 (0)

420 87301

www.rg-racing.com

Email:

info@rg-racing.com

Table of Contents

Need help?

Do you have a question about the FP0237 and is the answer not in the manual?

Page 1 Page 1 of 5 FP0237 FITTING INSTRUCTIONS FOR FP0237 FORK PROTECTORS TO FIT KAWASAKI Z-H2 2020- This kit contains the items pictured and labelled over page. Some parts may be shown for clarity of instructions only. Do not proceed until you are sure all parts are present.
Page 2 Page 2 of 5 FP0237 TOOLS REQUIRED GENERAL TORQUE SETTINGS M4 BOLT = 8Nm Socket Set to Include 2 x 13mm sockets and wrenches. M5 BOLT = M6 BOLT = M8 BOLT = 20Nm 0 BOLT = 40Nm M12 BOLT = 40Nm LEGEND ITEM No.
Page 3 P&P – at the prevailing price at time of purchase). The customer must pay any and all carriage charges. No returns of discontinued products, unless within 14 days of purchase. This policy does not affect your statutory rights and does not refer to faulty goods. NOTICE DE MONTAGE POUR FP0237 PROTECTIONS FOURCHE POUR KAWASAKI Z-H2 2020- R&G Unit , Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ...
Page 4 Page 4 of 5 FP0237 E KIT CONTIENT LES ARTICLES ILLUSTRES ET ETIQUETES SUR LA PAGE ERTAINES PARTIES PEUVENT ETRE PRESENTES UNIQUEMENT POUR LA CLARTE DES INSTRUCTIONS E PAS PROCEDER AU MONTAGE TANT QUE VOUS N ETES PAS SUR QUE TOUTES LES PIECES SOIENT...
Page 5 Page 5 of 5 FP0237 ARTICLE No. DESCRIPTION QTÉ ARTICLE 1 B0445 M8 PROTECTION CRASH (LES 2 CÔTÉS) ARTICLE 2 SB148 AXE (M8 x 332mm DE LONG) ARTICLE 3 S0585 ENTRETOISE DE PROTECTION CRASH CÔTÉ GAUCHE ARTICLE 4 S0586 ENTRETOISE DE PROTECTION CRASH CÔTÉ DROIT ARTICLE 5 M8 ÉCROU...