Using Sold-Separately Stereo Earphone; Updating Software - Fujitsu Arrows Z IS Series Basic Manual

By au
Table of Contents

Advertisement

• The Common AC Adapter 01 can be used only in Japan. 
Use the Common AC Adapter 02/03 for charging 
overseas.
* Use 18-pin microUSB conversion adapter 01 (sold separately) to connect to the 
ISW13F.
◎ Do not connect other than the supplied dedicated cable to Fujitsu 
AC adapter.
◎  If the power plug of Fujitsu AC adapter main unit is 
removed, attach it as shown.
◎ For the latest information on accessories, visit the au 
homepage (http://www.au.kddi.com/) or contact the 
Customer Service Center.
◎ The ISW13F does not support ASYNC/Fax transmission.
◎ Accessories described on this page can be purchased from the au 
Online Shop. However, some accessories may not be purchased.
From a PC : http://auonlineshop.kddi.com/
Using sold-separately Stereo 
earphone
By connecting Stereo earphone (sold separately) to the 
stereo earphone terminal of the ISW13F, you can hear the 
other party's voice during a call or playback sound of video/
music with the stereo earphone.
a
Open the stereo earphone terminal cover and 
connect a plug of the Stereo earphone to the 
stereo earphone terminal of the ISW13F
Stereo Earphone 
terminal cover
Stereo Earphone plug
b
"Phone MIC/"Headset MIC"
Updating Software
The ISW13F supports Keitai update. Keitai update is a 
function which updates software for au cell phones.
Procedure of updating au cell phone software by Keitai 
update is as follows. Regardless of update methods, au cell 
phone reboots automatically before updating software and 
reboots again after the software is updated.
Manual update
You can check if software update is needed by 
connecting the network.
• If update is needed : Download data for software 
*1
to update
• If update is not needed : Continue to use.
Automatic 
Software will be updated when notification of 
update
software update from au.
• Automatic update type : Automatically update 
when the notification is received
• User agreement type : A confirmation screen 
appears when the notification is received.
*1
You can specify a start date and time for update such as nighttime, a time when 
you do not use au cell phone (reserved update) instead of updating right after 
downloading.
*2
When "Auto Setup" is set to "OFF", a confirmation screen appears in the same 
way as user agreement type.
.
*2
.
59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Arrows z isw13f

Table of Contents