b
Connect the microUSB plug of the USB cable
into the power terminal of the desktop holder
Make sure the shape of the microUSB plug, and insert it
straight into the terminal.
c
Insert the ISW13F with the battery pack
attached into the desktop holder
d
Insert the power plug of Fujitsu AC adapter
into an outlet (100V-240V AC)
e
Make sure the notification LED turns in red
When charging ends, the LED turns off.
f
When charging is finished, remove the
ISW13F from the desktop holder
Power terminal
LED
indicator
Desktop Holder
◎ Do not make a call, receive a call, or communicate with the ISW13F
inserted in the desktop holder.
◎ Be careful not to lean the ISW13F.
34
100V-240V AC
power outlet
microUSB
plug
Power
plug
Fujitsu AC adapter
◎ When a commercially available cover is attached on the ISW13F,
charging with desktop holder may be failed. Remove the cover and
then attach to the desktop holder.
Charging with Fujitsu AC adapter
Charging with the Fujitsu AC adapter is explained.
microUSB
External
plug
connection jack
LED indicator
microUSB
plug
USB cable
Fujitsu AC adapter
a
Insert the USB plug of the supplied USB cable
into the USB connection terminal of the
Fujitsu AC adapter
b
Open the external connection terminal cover
of the ISW13F (b-1) and insert the microUSB
plug (b-2)
• Make sure the shape of the microUSB plug and external
connection terminal, and insert it straight into the terminal.
c
Insert the power plug of Fujitsu AC adapter
into an outlet (AC 100V - 240V)
To 100V-240V
AC power outlet
-1
-2
Power plug