Warranty - MasterCraft Hawkeye Laser 54-8347-0 Operating Manual

damaged, missing, or worn parts. Check for loose screws, misalignment or binding of
moving parts, or any other conditions that may affect the operation. If abnormal vibration or
noise occurs, turn the tool off immediately, and have the problem corrected before further
use.
The tool should be unplugged from the power supply before cleaning or performing any
maintenance. Using compressed air may be the most effective cleaning method. Always
wear safety goggles when cleaning tools with compressed air.
WARNING: Do not let brake fluids, gasoline, petroleum-based products, penetrating
oil, etc., come into contact with plastic parts. They contain chemicals that can damage,
weaken, or destroy plastic.
WARNING: When servicing, use only identical replacement parts. Use of any other
parts may create a hazard or cause damage to the product.
WARNING: Use only accessories that are recommended for your model by the
manufacturer. Accessories that may be suitable for one tool may become hazardous when
used on another tool.
WARNING: Maintain tools with care. Keep cutting tools sharp and clean. Properly
maintained tools with sharp cutting edges are less likely to bind, and are easier to control.
WARNING: Check the power cord before each use. If it is damaged replace it
immediately. Never use a tool with a damaged cord.
WARNING: To ensure safety and reliability, all repairs should be performed by a
qualified service technician.

WARRANTY

This Mastercraft product carries a three (3) year replacement warranty against defects in
workmanship and materials. At its discretion, Mastercraft Canada agrees to have any
defective part(s) repaired or replaced free of charge, within the stated warranty period, when
returned by the original purchaser with proof of purchase. This product is not guaranteed
against wear or breakage due to misuse and/or abuse. The cutting blades have a one (1)
year replacement warranty against defects in workmanship and materials only.
warranty does not cover wear and tear of the cutter blades.
This product is not guaranteed if used for industrial or commercial purposes.
TOLL FREE HELPLINE: 1-800-689-9928
10
The