Changing How Drives Are Displayed; Collapsed And Expanded Views - Adaptec RAID 2120S Installation And User Manual

Changing How Drives are Displayed

You can choose how information is displayed in the Physical
devices view by clicking one of the following buttons in the Logical
devices view.
Displays physical device information in text format. This is the
default view.
Displays physical device information in full size capacity format.
A full-length bar is displayed for each drive, regardless of
capacity. A small segment on each drive is reserved for the RAID
signature; this area is indicated by a gray cap at the end of each bar.
Note: A drive shaded in light blue is not part of any disk group.
Displays physical device information in relative size capacity
format. A full-length bar is displayed for the largest drive;
proportionally shorter bars are displayed for other drives.

Collapsed and Expanded Views

You can display a collapsed or expanded view of the system
configuration. Initially, Adaptec Storage Manager displays a
collapsed textual view of the configuration information in both the
Logical devices and Physical devices views.
In the Logical devices view...
Click to expand and collapse information about disk groups and
logical devices. The expanded display shows the following
information about each logical device:
Disk group name and capacity (if available)
Logical device size
Logical device state
Build progress
In the Physical devices view...
Click to expand and collapse information about physical drives.
The expanded display shows the following information about
each drive:
Capacity of the drive
Drive ID
Drive state
Understanding Adaptec Storage Manager
5-4