Adaptec RAID 2120S Installation And User Manual page 119

Mirror Set Create—Creation of a RAID 1 (mirror).
Mirror Set Normal—The RAID 1 is in the normal state.
Reconfiguration Copy Container—An array is being used as a
copy (hidden) array (Copy).
Reconfiguration Destination Container—An array is being
used as a destination (hidden) array (Dest).
Reconfiguration RAID 5 Set—An array is being used as a
RAID 5 (hidden array).
Reconfiguration Source Container—An array is being used
as a source (hidden) array.
Reconfiguration Temporary Container—An array is being
used as a temporary (or hidden) array (Temp).
RAID 5 Set Unprotected—Creation of a RAID 5 (Unprot).
Example
AAC0> container list
Executing: container list
Total
Label Type Size
----- ----- ----- --- ------ ------- ----- ------------
0 Volume 30MB
Venus
Container Show Cache
The container show cache attributes are defined as follows:
Global Container Read Cache Size—Number of blocks
dedicated to the read cache.
Global Container Write Cache Size—Number of blocks
dedicated to the write cache.
Read Cache Setting—Reports whether the read cache is
enabled.
Example
AAC0> container show cache 0
Executing: container show cache 0
Global container Read Cache Size
Global container Write Cache Size : 63332352
Read Cache Setting
Write Cache Setting
Write Cache Status
Oth Stripe
Ctr Size Usage
None
: ENABLE
: ENABLE
: Active, cache enabled
Scsi Partition
C:ID:L Offset:Size
0:01:0 64KB: 15MB
02 64KB: 15MB
: 5345280
Command Line Interface
D-14