Adaptec RAID 2120S Installation And User Manual page 49

The syntax to load the driver is:
load [pathname]aacraid.ham slot=number [options]
For example, the command to load the driver from the c:\nwserver
directory, with the verbose= option
load c:\nwserver\aacraid.ham slot=2 verbose=y
Notes:
Command line options are not case sensitive.
Placing commas between command line options is
optional.
To modify the
startup.ncf
1 At the server console prompt, type load nwconfig and press
Enter.
2 Select the NCF File Options menu, then press Enter.
Select the Modify Startup.ncf option, then press Enter.
3
4 Make the necessary changes. When you are done, press Esc.
Note: You can also use your DOS text editor to modify the
startup.ncf file, it resides on the DOS partition.
For additional information on the
NetWare documentation.
is:
ON
file:
startup.ncf
Installing the Driver
file, refer to your
3-12