Adaptec RAID 2120S Installation And User Manual page 126

container list [/all={boolean}] [/full={boolean}]
[{container}]
Lists information about the arrays on the controller.
Parameters
{container}—ID number of the array containing information
to display.
Switches
/all—Specifies whether to list all containers on the system.
/full—Specifies whether to display detailed information.
container move {container1} {container2}
Moves the first array number specified to the second array
number specified; in effect, to renumber an array.
Parameters
{container1}—ID number of the array to renumber.
{container2}—ID number to assign to the array specified in
container1.
container promote {container}
Creates a multilevel volume from a RAID 0 or a single entry
volume.
Parameters
{container}—ID number of the array to promote to a
multilevel array.
container readonly {container}
Sets the protection on the array to read-only access.
Parameters
{container}—ID number of the array to set to read-only access.
container readwrite {container}
Sets the protection on an array to read-write access.
Command Line Interface
D-21