Adaptec RAID 2120S Installation And User Manual page 127

Parameters
{container}—ID number of the array to set to read-write
access.
container reconfigure [/stripe_size={integer}]
[/mirror={boolean}] [/partition_move={boolean}]
[/partition_size={integer}] [/raid5={boolean}]
[/raid10={boolean}] [/restart={boolean}]
[/stripe={boolean}] [/volume={boolean}]
[/wait={boolean}] {container} [{device_ID}...]
Changes the configuration of an array.
Parameters
{container}—ID number of the array to reconfigure.
{device_ID}—One or more devices.
Switches
/stripe_size—Stripe size of the array.
/mirror—Reconfigure the array as a RAID 1.
/partition_move—Specifies that the array will move partitions
instead of add extra space.
/partition_size—Size of a partition.
/raid5—Reconfigure the array as a RAID 5.
/raid10—Reconfigure the array as a RAID 10 (stripe of
mirrors).
/restart—Restart reconfiguring the array.
/stripe—Reconfigure the array as a RAID 1.
/volume—Reconfigure the array as a volume.
/wait— If FALSE (the default), the operation is performed in the
background and the command prompt is returned immediately.
If TRUE, the operation is performed immediately and the
command prompt is returned only when done.
container remove failover {container} {device_ID}
[{device_ID}...]
Removes one or more failover disks.
Command Line Interface
D-22