Using Scratch Bank Mode - PIONEER DJ DDJ-FLX6 Instruction Manual

When playback reaches the end of the domain (the section sliced into
8 equal sections) the playback position returns to the beginning of the
domain.
 Using Scratch Bank mode
You can load Scratch Bank sounds onto a deck so you can manipulate
them with controls such as the jog wheel.
1 Open the [SCRATCH BANK] panel on Serato DJ Pro.
2 Press the [SAMPLER] mode button while holding the [SHIFT]
button.
The unit enters Scratch Bank mode.
3 Press a Performance Pad assigned with the Scratch Bank sound
you want to load.
The Scratch Bank sound is loaded onto the deck.
• The Scratch Bank slots are assigned to the Performance Pads as follows:
1: Slot 1, 2: Slot 2, 3: Slot 3, 4: Slot 4,
5: Slot 5, 6: Slot 6, 7: Slot 7, 8: Slot 8
4 Press the Performance Pad while holding the [SHIFT] button.
The previous loaded track is loaded again.
1 2 3 4 5 6 7 8
1 2
5 6
92
En
Serato DJ Pro
3 4
7 8