Changing The Merge Fx Settings - PIONEER DJ DDJ-FLX6 Instruction Manual

Changing the Merge FX settings

1 Click in the [MFX] panel in rekordbox.
The [MERGE FX Settings] screen is displayed, and you can change the
settings.
• Change the settings below.
– [PRESET]: Changes the preset for Merge FX.
– [BUILD FX]: Changes the type of effect applied to the track when Merge
FX is turned on.
– [BUILD SAMPLE]: Changes the sample sound/oscillator sound triggered
when Merge FX is turned on.
– [RELEASE FX]: Changes the Release FX applied when Merge FX is
turned off.
– [DROP SAMPLE]: Changes the sample sound triggered after the Release
FX applied when Merge FX is turned off.
• You need to select the sample sound when you make the following settings.
Click the [?] icon to select the sample sound.
(You need to load the sample sound into the sampler slot before you do this.)
– [BUILD SAMPLE] > [REPEAT SAMPLE]
– [BUILD SAMPLE] > [REPEAT UP SAMPLE]
– [DROP SAMPLE] > [SAMPLER]
63
En
rekordbox