PIONEER DJ DDJ-FLX6 Instruction Manual page 58

– [FX] panel:
• FX2-3
– [FX SELECT] indicators:
FX1 1 2 3
FX2 1 2 3
– [FX] panel:
3 Press the [BEAT FX CH SELECT] button.
The channel that Beat FX will be applied to changes each time you press the
button.
– [1]: Applies Beat FX to the sound of channel 1.
– [2]: Applies Beat FX to the sound of channel 2.
– [3]: Applies Beat FX to the sound of channel 3.
– [4]: Applies Beat FX to the sound of channel 4.
– [MST]: Applies Beat FX to the sound of the [MASTER] channel.
4 Press the [BEAT ] or [BEAT ] button.
Set the number of beats (or parameters) synchronized to the effect sound.
• When set to 2 beats, 1and 4 flash.
• When set to more than 16 beats, 16 flashes.
• When set to less than 1/4 beat, 1/4 flashes.
• When the set number of beats is a minus number, the number flashes
rapidly.
• When the parameter is in %, no numbers are lit.
5 Press the [BEAT FX ON/OFF] button.
The Beat FX is applied to the sound of the channel you set in step 3.
You can adjust the parameter of Beat FX by turning the [BEAT FX LEVEL/
DEPTH] knob.
58
En
rekordbox