SIIG CE-H24911-S1 Quick Start Manual

Dear Valued Customer
(Just WANTED YOU TO KNOW)
WE REALLY
APPRECIATE
YOUR PURCHASE
~thank you~

Features

• HDMI 2.0 & HDCP 2.2 compliant
• The highest resolution is 4K@60Hz
• Support one to one or one to many
• The transmission distance is up to 120m
• IR passback supports 20-60KHz wide
frequency
• Compatible with IEEE-568B Cat5e/6 cables
• Support 2.0 stereo audio

Package contents

1. HDMI Transmitter
2. HDMI Receiver
3. IR blaster (IR out) cable
4. IR receiver (IR IN) cable
5. Power adapter 5V/3A x2
6. Quick start guide

Layout

TX transmitter
HDMI IN IR OUT RESET
1 HDMI input Connect with HDMI source
Connect with IR blaster cable
Please put the IR blaster close to
2 IR blaster
source device to better transmit the
IR signal from receiver
3 Reset Restart the device
4 Power indicator LED turns on when power on
5 Power input Connect with power adapter 5V/3A
6 Data indicator Blink when data is transmitted
LED turns on when the transmitter
Connection
7 connects to the receiver, otherwise
indicator
it remains off
8 RJ-45 port Connect with Cat5e/6 cable
RX receiver
HDMI OUT IR IN RESET
1 HDMI output Connect with HDMI display
Connect with IR receiver cable
Please make sure the remote control
2 IR receiver
is within the required range of IR
receiver
3 Reset Restart the device
4 Power indicator LED turns on when power on
5 Power input Connect with power adapter 5V/3A
6 Data indicator Blink when data is transmitted
LED turns on when the transmitter
Connection
7 connects to the receiver, otherwise
indicator
it remains off
8 RJ-45 port Connect with Cat5e/6 cable