Viavi NSC-100 User Manual page 48

Chapter 2 Meter Setup
Controller Traffic
Controller IP / Host
y
Controller Port
y
Persist on Boot
y
Proxy
y
Use Test Data Traffic Settings
y
Interface Protocol
y
Address Type
y
User Class
y
VLAN
y
VLAN ID
y
VLAN Priority
y
Data Interface
Interface Protocol
y
Customize MAC Address
y
Custome MAC Address
y
Address Type – DHCP or Static
y
IPv4 Address – Enter the instrument's IP address (which will be used when
y
accessing the provider network).
IPv4 Gateway – Enter the address for the gateway that is used to route packets
y
that are not on the same subnet.
IPv4 Netmask – Enter the netmask address to indicate whether the packets are
y
to be routed to other networks or sub-networks.
IPv4 DNS – Enter the address of the DNS server.
y
User Class
y
Vendor
y
VLAN
y
VLAN ID
y
VLAN Priority
y
48
NSC-100 User's Guide
22137280 March 2021