Alpha-InnoTec WWC H/X Series Operating Manual page 26

Technical data / Scope of delivery
Unit designation
Heat pump type
Indoors ı Outdoors
Installation location
Conformity
Heating capacity/COP at
Performance data
W10/W35
W10/W45
W10/W35
Limits of use
Sound Sound pressure level averaged at distance of 1m around the machine (in free field)
Sound power level to EN12102
Heat source
Flow rate: minimum flow ı nominal flow ı maximum flow
Heating circuit
Pressure loss heat pump ∆p (with cooling ∆pK) ı Flow rate
Free compression heat pump ∆p (with cooling ∆pK) ı Flow rate
General unit data
Voltage code ı all-pole circuit breaker heat pump *)
Electrics
Voltage code ı circuit breaker control voltage *)
Voltage code ı circuit breaker electric heating element *)
Effective power consumption in the standard point W10/W35 to EN14511: Power consumption ı current consumption ı cosφ
Heat pump
Maximum machine current within the use limits
Starting current: direct ı with soft starter
Degree of protection
Output, electric heating element 3 ı 2 ı 1 phase
Circulation pump, heating circuit at nominal flow rate: Power consumption ı current consumption
Components
Circulation pump, heat source at nominal flow rate: Power consumption ı current consumption
Specification only for units with designator K: Cooling output at nominal flow rate (15°C heat source, 25°C heating water)
Passive cooling function
Safety component heating circuit ı Safety component heat source
Safety equipment
Heating and heat pump controller
Electronic soft starter
Expansion vessels
Overflow valve
Vibration decouplers
UK813241-a
26
Subject to change without notice | 83050700fUK – Translation into English of the original German operating manual | ait-deutschland GmbH
Brine/water ı Air/water ı Water/water
Standard point to EN14511
Standard point to EN14511
Standard point acc. to EN255
Heating circuit
Heat source
additional operating points
Flow rate: minimum flow ı nominal flow ı maximum flow
Pressure loss heat pump ∆p (with cooling ∆pK) ı Flow rate
Free compression heat pump ∆p (with cooling ∆pK) ı Flow rate
Recommended heat source pump
Power consumption of the heat source pump at nominal throughput
Nominal power / electricity consumption of heat source pump
Total compression of the recommended heat source pump at nominal throughput
Dirt trap, to be installed upstream of the heat pump (included in additional box)
Dimensions (see dimensioned drawing for the specified unit size)
Total weight (including cooling)
Additional weight module 1
Additional weight module 2
Connections Heating circuit
Heat source
Refrigerant type ı Quantity
Refrigerant
Heat source: Scope of delivery ı Volume ı Initial pressure
Heating circuit: Scope of delivery ı Volume ı Initial pressure
Heating circuit ı heat source
2 compressors
1 compressor
2 compressors
1 compressor
*) comply with local regulations
• applicable ı — not applicable
• applicable ı — not applicable
CE
kW ı ...
kW ı ...
kW ı ...
kW ı ...
kW ı ...
°C
°C
...
dB(A)
dB
l/h
bar (bar) ı l/h
bar (bar) ı l/h
kW
kW ı A
bar
l/h
bar (bar) ı l/h
bar (bar) ı l/h
unit size
kg (kg)
kg
kg
...
...
... ı kg
... ı A
... ı A
ı A
kW ı A ı ...
A
A ı A
IP
kW ı kW ı kW
kW ı A
kW ı A
kW
Incl. in scope of delivery: • yes — no
Incl. in scope of delivery: • yes — no
integrated: • yes — no
• yes — no ı l ı bar
• yes — no ı l ı bar
integrated: • yes — no
Incl. in scope of delivery: • yes — no
n.d. = not detectable