Anchorage Points - Promeba PC-750 Series User Manual

USER GUIDE // STRETCHER PC-750 + SUPPORT PB-720
Review 01/16
02
INSTALLATION
02.2

Anchorage points

Before putting the stretcher support into operation,
ensure that each and every anchorage points are pla-
ced and clasped.
ANCHORE FOR PB-720 · PB-725
(8 anchorage points)
LIMIT AMBULANCE FLOOR
441mm MÁXIM
185
FREE ZONE TO THE FLOOR
256
READ THE INSTRUCTIONS MANUAL IN CASE OF ANY DOUBTS DURING THE INSTALLATION.
12,5 (X8)
102
***IMPORTANT TO ITS INSTALLATION***
SREWS TO ATTACH ON THE FLOOR M12 S/NORMA DIN-7991 (8 UNITS)
BEFORE DRILLING ON THE FLOOR OF THE AMBULANCE, VERIFY THAT THE LATE-
RAL MOVEMENT OF THE STRETCHER SUPPORT ARE PLACED ON 0 POSITION.
KEEP THE MINIMUM LIMITS INDICATED ON THE PLAN AND ENSURE OF AFFIXING
THE SET ON THE REINFORCED CHASSIS AREA.
THE ELECTRIC INSTALLATION OF THE SET MUST BE COMPLETED WITH THE ELEC-
TRICAL SYSTEM OF THE AMBULANCE DISCONNECTED.
USE SCREWS DIN-7991 - M12 - 10.9
1274
2042
LIMIT AMBULANCE WALL
102
180mm MÍNIMO
11