Additional Options - Adaptec ARO-1130CA Installation And Hardware Manual

Send Start Unit Command—This option determines whether
the Start Unit Command is sent to the SCSI device at bootup
(most devices do not require this). The default setting is No.
Include in BIOS Scan—This option determines whether the
ARO-1130CA BIOS supports hard disk drives attached to the
SCSI channel controlled by the ARO-1130CA. When set to Yes,
the ARO-1130CA BIOS controls the hard disk drive. When set
to No, the ARO-1130CA BIOS does not control the hard disk
drive. The default setting is Yes.

Additional Options

Array1000CA BIOS
This option determines whether the ARO-1130CA BIOS is installed
at boot time. When set to Enabled, the ARO-1130CA BIOS is
installed, and all Int13 (except bootable CD-ROM) devices are sup-
ported. When set to Disabled, the ARO-1130CA BIOS is not installed.
The default setting is Enabled.
BIOS Support for Bootable CD-ROM
This option determines whether the ARO-1130CA BIOS supports
booting from a CD-ROM drive. When set to Enabled, the
ARO-1130CA allows booting from a CD-ROM drive.
Configuring the ARO-1130CA with the SCSISelect Utility
5-7