Maintenance Schedule - pro.point JPC60 User Manual

8570533

MAINTENANCE SCHEDULE

Maintenance Interval
Daily before
operating.
After the first 20
operating hours.
After the first 50
operating hours or
every week.
After the first 100
operating hours or
every month.
After the first 300
operating hours or
every year.
LUBRICATION
Inspect and lubricate the tool when required. Use grease to
lubricate the tool. Other lubricants may not be suitable and
could damage the tool or cause a malfunction during use.
VIBRATOR SYSTEM LUBRICATION
The tool's vibrator housing (#D13) contains the vibrator rotary
shaft (#D12) that causes the base plate to move. The vibrator
housing contains extreme pressure oil to bathe the rotary shaft
during operation.
Replace the oil every 300 hours with 150 cc of SAE 80W90
Multigear GL-5 Oil (SKU 8003027).
14
JPC60 Plate Compactor
Maintenance Point
1. Check the fuel level.
2. Check the engine oil level.
3. Inspect the fuel lines.
4. Inspect the air filter and replace it
if needed.
5. Check and tighten the external
hardware.
1. Check and adjust the drive belt.
2. Change the engine oil.
1. Check and adjust the drive belt.
2. Clean the air cleaner element.
3. Change the engine oil.
4. Check and clean the spark plug.
1. Clean the fuel strainer.
1. Check and adjust the valve clearance.
2. Clean the cylinder head.
3. Change the lubrication oil (see
Lubrication).
For technical questions call 1-800-665-8685
V1.2