Work Area; Personal Safety; Personal Protective Equipment - pro.point JPC60 User Manual

8570533

WORK AREA

1. Operate in a safe work environment. Keep your work area
clean, well lit and free of distractions.
2. Keep anyone not wearing the appropriate safety
equipment away from the work area.
3. Store tools properly in a safe and dry location. Keep tools
out of the reach of children.
4. Do not install or use in the presence of flammable gases,
dust or liquids.

PERSONAL SAFETY

WARNING! Wear personal protective equipment approved by
the Canadian Standards Association (CSA) or American
National Standards Institute (ANSI).

PERSONAL PROTECTIVE EQUIPMENT

1. Always wear impact safety goggles that provide front and
side protection for the eyes. Eye protection equipment
should comply with CSA Z94.3-07 or ANSI Z87.1 standards
based on the type of work performed.
2. Wear gloves that provide protection based on the work
materials or to reduce the effects of tool vibration.
3. Non-skid footwear is recommended to maintain footing
and balance in the work environment.
4. Wear protective clothing designed for the work
environment and tool.
5. Wear steel toe footwear or steel toe caps to prevent a foot
injury from falling objects.
6. Wear a NIOSH approved respirator when working on
materials that produce hazardous fumes, dust or
particulate matter.
7. This tool can cause hearing damage. Wear hearing
protection gear with an appropriate Noise Reduction
Rating to withstand the decibel levels.
4
JPC60 Plate Compactor
For technical questions call 1-800-665-8685
V1.2