Labnet Spectrafuge 6C Manual page 3

To use this chart, find the radius value on the radius scale. Place the
edge of a ruler on the value. Place the right side edge of the ruler on the
speed scale at the desired speed. The estimated RCF can then be read
from the RCF scale where the ruler edge passes through it. This chart
can also be used to determine the proper speed for the desired RCF
value.
11
Table of Contents
1. General Information
Description
Safety precautions
Technical data
Accessories supplied with unit
Warranty
2. Installation
Unpacking the centrifuge
Required space
Installing the centrifuge
3. Installing the Rotor
Rotors and accessories
Rotor maintenance
Removing and installing the angle rotor
Overloading rotors
4. Operation
Closing the lid
Lid release
Lid lock
Speed selection
Selection of operating time and momentary operation
Starting the Centrifuge
5. Service and Maintenance
Service
Cleaning
Disinfection
Replacing fuses
6. Troubleshooting
7. Where to Call
8. Determination of g-values
1
2
3
6
8
9
10
10