Advertisement
Quick Links
Advertisement
Related Manuals for WATSON D9
Summary of Contents for WATSON D9
- Page 1 ASSEMBLY D9 Height Adjustable Desk 360.394.1300 watsonfurniture.com V.2.00 09/2019...
-
Page 2: Important Safety Instructions
This product is for use on a nominal 120-V circuit. Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product. 2 D9 DESK ASSEMBLY INSTRUCTIONS... - Page 3 Truss Head Panhead M6-1.0x40mm Cap #8x5/8 Screw Desk Switch Screw (125290) Cutting Screw Screw (122800) Screw (125293) (012192) (116754) (121538) M6x25mm Socket Head Cap Screw (125265) Tools 4mm Hex Key 5mm Hex Key Phillips Head Drill Bit/Screwdriver 3 D9 DESK ASSEMBLY INSTRUCTIONS...
- Page 4 (such as a blanket). Desk Switch (012192) Attach Lifting Columns Drop the lifting columns into the cutouts in the support rail and secure in place with (4) screws per column. M6-1.0x12mm Cap Screw (125290) 4 D9 DESK ASSEMBLY INSTRUCTIONS...
-
Page 5: Attach Feet
Plug the power cord into the AC port in the control box, and loop the cord through the channel provided as shown. Drop the control box into the support rail trough. Slide it into position underneath the top plate. 5 D9 DESK ASSEMBLY INSTRUCTIONS... - Page 6 Secure the control box to the plate in the support rail with one screw, as shown below. Coil any excess cable in the support rail trough. Power Cord Cutout M6-1.0x40mm Cap Screw (125293) 6 D9 DESK ASSEMBLY INSTRUCTIONS...
- Page 7 Secure the cable to the worksurface with (2) cable clips and (2) screws. #8x5/8 Screw (116754) Attach Worksurface Secure the worksurface to the support rail using (14) screws. M6-1.0x12mm Cap Screw (125290) 7 D9 DESK ASSEMBLY INSTRUCTIONS...
- Page 8 Attach the utility power clips to the cable tray using (2) thread cutting screws (a.). Press the utility power into the clips until you hear an audible click (b.). If no cable tray is used, proceed to step 10. #8-32 Thread Cutting Screw (121538) 8 D9 DESK ASSEMBLY INSTRUCTIONS...
- Page 9 Optional: Attach Power to Support Rail Attach the utility power clips to the support rail using (2) thread cutting screws (a.). Press the Utility Power into the clips until you hear an audible click (b.). #8-32 Thread Cutting Screw (121538) 9 D9 DESK ASSEMBLY INSTRUCTIONS...