Advertisement
Quick Links
Advertisement
Related Manuals for WATSON D9
Summary of Contents for WATSON D9
- Page 1 ASSEMBLY D9 Desk Accessories 360.394.1300 watsonfurniture.com V.2.01 08/2020...
- Page 2 M10x1.5 ( 0001154) Washer .75 x ( 0001140 ) ( 0001259 ) (122800 ) .075 x .408 x .155 ( 0001408 ) Tools 3mm Hex Key Philips Head Screwdriver Bit Philips Head Screwdriver Bit 2 D9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 3 Convenience Power Attach Convenience Power to Desk Place power unit clamp on the back surface of the desk (a.). Once positioned, tighten clamping screws until secure (b.). 3 D9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
-
Page 4: Privacy Screen
Insert Screen Clamping Glide Slide the clamping glide into the bracket and screw down through the hole in the bracket. Leave enough space for the worksurface between the glide and the top of the bracket. 4 D9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS... - Page 5 Mount Screen on Desk Slide brackets onto desk surface, and position screen in place (a.). Secure the screen to the desk by tightening the clamping glide against the underside of the worksurface with a flathead screwdriver (b.). 5 D9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 6 Attach the threaded knob to the modesty screen, sandwiching the nylon shoulder washer with the smaller side touching the screen. Complete on both sides of screen. Glide, 34mm DIA , M10x1.5 ( 0001154) Nylon Shoulder Washer .75x.075x.408x.155 ( 0001408 ) 6 D9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 7 Modesty Screen (continued) Mount Screen to Desk Slide the modesty hardware onto the brackets until the screen is fully seated. 7 D9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 8 Hold this bracket against the underside of the top plate of the rail. Outer Rail E-Chain Bracket Slide the outer rail E-Chain bracket into the slot of the inner rail E-Chain bracket. 8 D9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 9 Profile Cap Screw ( 0001140 ) Attach E-Chain to Worksurface Attach the opposing end of the E-chain to the underside of the worksurface with two screws (122800). Trus s Head Panhead Screw #10x5/8” (122800 ) 9 D9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 10 Glide, 5/16-18 x 1” ( 0000229 ) Attach Side Bracket(s) Position the side bracket on the desired side of the desk and secure to the surface with a flathead screwdriver. Glide, 5/16-18 x 1” ( 0000229 ) 10 D9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 11 Secure the medallion to the side bracket with 2x M6 x 8mm (0001259) screws. M6-1.0x8mm Low Profile Cap Screw ( 0001259 ) 11 D9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 12 Corner Desk Screen (continued) Attach Accessory Insert the hook or marker cup into the slot in the metal portion of the screen. 12 D9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...