Land Pride OS1548 Operator's Manual page 38

Section 3: Adjustments
Small Seeds Drive Train
IMPORTANT: The Small Seeds Seedbox drive train
must be is set-up correctly to match the "drive range"
used for the Main Seedbox.
1. Use Small Seeds Seed Rate charts beginning on
page 37 to determine seed rate.
Refer to Figure 3-20 & Figure 3-21 on page 35:
2. Determine which range and drive type the main
seedbox is in and then check to make sure the Small
Grass Seeds box drive train is set-up correctly.
Refer to Figure 3-19:
3. Skip to "Calibrate Small Seeds Seedbox" if its drive
train is set-up correct. If the drive train set-up is
incorrect, change sprocket (#1) as follows.
a. Remove chain guard (not shown).
b. Loosen idler plates (#2 & #4) and remove roller
chains wrapped around sprocket (#1).
c. Remove 5/8" nut (#5), 5/8" lock washer (#6), and
1" OD x 1/4" long spacer (#3).
d. Flip double sprocket (#1) to desired drive type and
reassemble.
e. Install removed chains and adjust idler
plates (#2 & #4) for chain tightness.
f. Install removed chain guard.
34
OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M
Table of Contents
Small Seeds Drive Train
Figure 3-19
30321
11/28/18