Download
Share
Print this page
Land Pride OS1548 Operator's Manual
  1. Manuals
  2. Brands
  3. Land Pride Manuals
  4. Seeders
  5. OS1548
  6. Operator's manual

Land Pride OS1548 Operator's Manual

Overseeder
Hide thumbs Also See for OS1548:

Advertisement

Quick Links

Download this manual
Overseeder
OS1548 and OS1572
26780
Table of Contents
(S/N 166724+)
!
Read the Operator's Manual entirely. When you see this symbol,
the subsequent instructions and warnings are serious - follow
without exception. Your life and the lives of others depend on it!
Cover photo may show optional equipment not supplied
with standard unit.
For an Operator's Manual and Decal Kit in French
Language, please see your Land Pride dealer.
308-303M
Operator's Manual
Printed 11/28/18

Advertisement

loading

Related Manuals for Land Pride OS1548

Summary of Contents for Land Pride OS1548

  • Page 1 Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit. For an Operator’s Manual and Decal Kit in French Language, please see your Land Pride dealer. Printed 11/28/18...
  • Page 2 Serial Number Machine Height Machine Length Machine Width Machine Weight Delivery Date First Operation Accessories Dealer Contact Information Name: Street: City/State: Telephone: Email: California Proposition 65 WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M 11/28/18...
  • Page 3 Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
  • Page 4 Download the appropriate App on your Refer to Parts Manual QR smart phone, open the App, point your Locator on this page for phone on the QR code and take a picture. detailed instructions. OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M 11/28/18...
  • Page 5  Important Safety Information Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look for the Safety Alert Symbol Careful operation is your best The SAFETY ALERT SYMBOL indicates there is a assurance against an accident.
  • Page 6  Lower implement to the ground and  Replace parts on this implement implement. follow all shutdown procedures with genuine Land Pride parts only.  Attach the chain to the tractor before leaving the operator’s seat to Do not alter this implement in a way drawbar support or other specified perform maintenance.
  • Page 7 Use Seat Belt and ROPS Handle whenever driving on public roads. Chemicals Properly  Land Pride recommends the use of a CAB or roll-over-protective-  Protective clothing should be structures (ROPS) and seat belt worn. in almost all power machines.
  • Page 8 Spray soapy water onto the cleaned area. all damaged or missing labels. Order new labels from your Peel backing from label and press label firmly onto the nearest Land Pride dealer. To find your nearest dealer, surface. visit our dealer locator at www.landpride.com.
  • Page 9 Table of Contents Important Safety Information 818-129C Danger! Rotating Knife Hazard 26780 818-130C Caution! Use 540 rpm power take-off only 26780 818-132C Danger! Thrown Object Hazard 26780 11/28/18 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M...
  • Page 10 Table of Contents Important Safety Information 818-560C Notice! Read & Understand Manual 26780 26783 818-543C Danger! Guard Missing (Beneath Chain Guard) 838-111C 26783 Danger! Moving Parts (Above Chain Guard) OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M 11/28/18...
  • Page 11 2" x 4 1/2" Red Reflector (2 places on back of main seeds box) 35922 858-095C (OS1548 Only) 2" x 4 1/2" Red Reflector (2 places on back of small seeds box) 35921 11/28/18 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M...
  • Page 12 Table of Contents Important Safety Information 13042 818-552C Danger! Entanglement 818-540C Danger! Guard Missing - DO NOT Operate 13042 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M 11/28/18...
  • Page 13 Table of Contents Introduction Introduction Using This Manual Land Pride welcomes you to the growing family of new product owners. This Overseeder has been designed • This Operator’s Manual is designed to help familiarize with care and built by skilled workers using quality you with safety, assembly, operation, adjustments, materials.
  • Page 14 3. For further assistance write to: Land Pride Service Department 1525 East North Street P.O. Box 5060 Salina, Ks. 67402-5060 E-mail address lpservicedept@landpride.com OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M 11/28/18...
  • Page 15 NOTE: When hooking hoist chain to sling brackets, 37551 be certain to either use a spreader bar on the chain or Sling Bracket Installation use a long chain to prevent bending sling brackets. Figure 1-1 11/28/18 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M...
  • Page 16 Rotor to rotor drive hub. b. Bearing mount plate to Overseeder main frame. 14645 c. Bearing cover through bearing mount plate to bearing Rotor to Overseeder Installation-Left-hand Side mount. Figure 1-5 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M 11/28/18...
  • Page 17 3. If rear roller (#13) is in the short arm position as shown, 14601 attach front chain guard (#7) and rear chain guard (#6) with 5/16" x 2 1/2" bolts (#8) in the locations shown. Rear Roller Drive Assembly with Short Arm Figure 1-8 11/28/18 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M...
  • Page 18 Table of Contents Section 1: Assembly & Set-up Refer to Figure 1-9: NOTE: Land Pride’s Quick Hitch can be attached to 4. If rear roller (#13) is in the long arm position, attach the tractor to provide quick and easy 3-point hook- front chain guard (#1) and rear chain guard (#2) with up and detachment.
  • Page 19 To avoid minor or moderate injury: Some tractors are Tractor End equipped with two power take-off speeds. Do not exceed 540 rpm power take-off speed or equipment breakage may result. Figure 1-13 11/28/18 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M...
  • Page 20 Refer to Figure 1-14: Make sure driveline is properly installed and level before checking driveline collapsible length. (Refer to “Driveline Installation & Hook-Up” on page 14.) OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M 11/28/18...
  • Page 21 Start tractor and raise seeder up just enough to remove support blocks. 2. Without changing 3-point lift height, shutdown tractor properly before dismounting. Refer to “Tractor Shutdown Procedure” on page 14. 3. Remove support blocks. 11/28/18 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M...
  • Page 22 Make necessary changes Figure 1-19 and repeat step 3 above. 5. Check wire harness routing to make sure wires will not be pinched while raising and lowering the seeder. OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M 11/28/18...
  • Page 23 Inspect seed cups and seed tubes for foreign Page 24 matter.td your nearest Land Pride dealer. Refer to “Slow Moving Vehicle Sign” on page 55. Set speed change sprocket for drive type Page 22 desired.
  • Page 24 8. Reinsert slow moving vehicle Sign in the mounting front of the rear roller to allow the roller to firm the soil bracket on the back of your tractor. around the seeds. OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M 11/28/18...
  • Page 25 4. Refer to Figure 3-8 on page 25. Make sure the feed cup door adjustment handle on each cup is set the The OS1548 and OS1572 have ground driven seed same across the Overseeder. Usually in the highest delivery systems. The power to drive the seed metering position.
  • Page 26 Retention drive chain (#2) by pressing down on its has 140 pitches, remove 8 pitches from it and add idler sprocket. When tensioned properly, tighten those 8 pitches to the drive chain. 1/2" flange locknut (#1) to maintain that tension. OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M 11/28/18...
  • Page 27 Sprocket Alignment with Rear Roller Drive 182 or 202 pitch drive chain (#2). Figure 3-6 Make sure spring tensioned idler sprockets (#1 & #4) are pressing against the drive and driven chains. 11/28/18 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M...
  • Page 28 Place a container under the three seed tubes to Seed Cup Settings gather seed as it is metered. Figure 3-7 f. Make sure the three seed cups have plenty of seed falling into them. OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M 11/28/18...
  • Page 29 -0- setting. Seed cup damage may occur. Do Not set door handles and seed rate adjustment lever to the widest open position with seed in the box unless complete clean out is desired. 11/28/18 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M...
  • Page 30 Low Range Kentucky Blue Grass (Pounds per 1000 Square Feet) High Range 10.1 10.5 Low Range IMPORTANT: Do Not operate seed rate adjustment lever at -0- cup setting. Seed cup damage may occur. OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M 11/28/18...
  • Page 31 High Range Low Range Wheatgrass - Western (Pounds per 1000 Square Feet) High Range Low Range IMPORTANT: Do Not operate seed rate adjustment lever at -0- cup setting. Seed cup damage may occur. 11/28/18 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M...
  • Page 32 47.7 49.5 51.0 Low Range 10.1 10.8 11.9 12.2 13.3 14.2 14.9 15.7 16.3 16.7 IMPORTANT: Do Not operate seed rate adjustment lever at -0- cup setting. Seed cup damage may occur. OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M 11/28/18...
  • Page 33 22.0 23.9 25.8 27.7 29.7 31.6 33.5 35.4 37.3 Low Range 10.0 10.6 11.2 11.9 IMPORTANT: Do Not operate seed rate adjustment lever at -0- cup setting. Seed cup damage may occur. 11/28/18 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M...
  • Page 34 (#1) and turning the turnbuckles (#2) to get a firm pressing action on the packer wheels. 10472 3. Tighten jam nuts making sure that dimension (A) is equal in both sides. Rear Roller Drive Without Front Roller Figure 3-11 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M 11/28/18...
  • Page 35 Set floating top link 16" from center line of top center link hitch hole to center line of lower lift arm hitch holes by adjusting length of tractor’s top center link. 11590 Floating Top Link Figure 3-14 11/28/18 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M...
  • Page 36 5. Make sure carriage bolts (#4) are nested in the same notch (#6) on both sides and tighten carriage bolt nuts. Short Arm 14636 10542 Long Arm 14673 Torsion Tine Height & Angle Adjustment Rear Roller Adjustment Figure 3-16 Figure 3-15 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M 11/28/18...
  • Page 37 3. Re-tighten locknut while holding head of bolt in place. NOTE: Excessive sprocket and chain wear will result if chain is overtightened. Slit Seeder Attachment Seed channel Funnel 10544 Rotor Drive Chain Adjustment 14696 Figure 3-18 Slit Seeder Adjustment Figure 3-17 11/28/18 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M...
  • Page 38 1" OD x 1/4" long spacer (#3). d. Flip double sprocket (#1) to desired drive type and reassemble. e. Install removed chains and adjust idler plates (#2 & #4) for chain tightness. f. Install removed chain guard. OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M 11/28/18...
  • Page 39 HIGH RANGE (Main Seedbox) LOW RANGE (Main Seedbox) Rear Roller Drive (Small Seeds Sprocket Arrangement) Figure 3-20 11668 LOW RANGE (Main Seedbox) HIGH RANGE (Main Seedbox) Gauge Wheel Drive (Small Seeds Sprocket Arrangement) Figure 3-21 11/28/18 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M...
  • Page 40 1/10 Acre Hectare Sq. M OS1548 OS1572 * Seed rates listed in charts for gauge wheel units are based on Overseeder having 18 x 8.50 x 8 turf tires with 20 psi. OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M 11/28/18...
  • Page 41 IMPORTANT: Do Not operate seed rate adjustment lever at -0- cup setting. Seed cup damage may occur. NOTE: Overseeders with gauge wheels are based on having 18 x 8.50 x 8 turf tires with 20 psi. 11/28/18 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M...
  • Page 42 IMPORTANT: Do Not operate seed rate adjustment lever at -0- cup setting. Seed cup damage may occur. NOTE: Overseeders with gauge wheels are based on having 18 x 8.50 x 8 turf tires with 20 psi. OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M 11/28/18...
  • Page 43 IMPORTANT: Do Not operate seed rate adjustment lever at -0- cup setting. Seed cup damage may occur. NOTE: Overseeders with gauge wheels are based on having 18 x 8.50 x 8 turf tires with 20 psi. 11/28/18 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M...
  • Page 44 IMPORTANT: Do Not operate seed rate adjustment lever at -0- cup setting. Seed cup damage may occur. NOTE: Overseeders with gauge wheels are based on having 18 x 8.50 x 8 turf tires with 20 psi. OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M 11/28/18...
  • Page 45 IMPORTANT: Do Not operate seed rate adjustment lever at -0- cup setting. Seed cup damage may occur. NOTE: Overseeders with gauge wheels are based on having 18 x 8.50 x 8 turf tires with 20 psi. 11/28/18 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M...
  • Page 46 IMPORTANT: Do Not operate seed rate adjustment lever at -0- cup setting. Seed cup damage may occur. NOTE: Overseeders with gauge wheels are based on having 18 x 8.50 x 8 turf tires with 20 psi. OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M 11/28/18...
  • Page 47 (#1) to be replaced. 2. Remove damaged knife and install new knife (#1) on same side of attaching flange as the damaged knife was using new 7/16" locknuts (#3), Land Pride Part No. 803-108C. Torque nuts to 68 ft-lbs. Gauge Wheel Disconnect...
  • Page 48 10. Slide knife mounting flanges (#8) and spacers (#9) off rotor shaft. 11. Replace knives (#12) as needed using new 7/16" locknuts, Land Pride part no. 803-108C. Torque nuts to 68 ft-lbs. NOTE: The spiral arrangement of knives needs to be reassembled in the same manner.
  • Page 49 (#15). roller still while rotating the roller next to it with your hand. If this cannot be done, then the rollers should be cleaned of debris that has impacted between them. 11/28/18 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M...
  • Page 50 IMPORTANT: Before proceeding, secure clutch firmly in a vise or other clamping device to prevent Type A Clutch Type B Clutch 26619 injury. Clutch Types Figure 4-8 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M 11/28/18...
  • Page 51 Step 6 Install bottom backup ring, compression spring, lock collar, and top backup ring. Step 6 Inspect friction discs and hub. Step 7 Install snap ring. 10435 10449 11/28/18 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M...
  • Page 52 Step 5 Insert greased balls. Step 6 Install bottom backup ring, compression spring, lock collar, and top backup ring. Step 6 Inspect friction disks and hub. Step 7 Install snap ring. 14232 14233 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M 11/28/18...
  • Page 53 4. Inspect all components and replace to their original position. Make certain stop flange (#3) is replaced Type B Clutch Assembly with its flanges down as shown. Figure 4-11 5. Fully tighten all 8 hex head socket bolts (#2). 11/28/18 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M...
  • Page 54 8. Repaint parts where paint is worn or scratched to ensure the seeder is ready for field use the next time you prevent rust. Ask your Land Pride dealer for aerosol hook-up to it. touch-up paint. Paint is also available in touch-up...
  • Page 55 Land Pride Part #821-045C (32 oz. bottle) Hours Drive Sprocket Hanger Bearing (Small Seeds Attachment) Type of Lubricant: Multi-purpose Grease 12225 Hours Feed Cup Drive Sprocket (Small Seeds Attachment) Type of Lubricant: Oil 12226 11/28/18 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M...
  • Page 56 (Maine Seedbox - 2 chains) Type of Lubricant: Chain Lubricant Do not overlubricate 33802 Required Small Seeds Drive Chains (Small Seeds Attachment - 3 chains) Type of Lubricant: Chain Lubricant Do not overlubricate 33803 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M 11/28/18...
  • Page 57 Hours Feed Cup Drive Sprocket Type of Lubricant: Oil 12126 Required Gearbox Type of Lubricant: Gear Lube 80-90 EP Fill to full mark on dip stick 12880 11/28/18 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M...
  • Page 58 Extended agitator paddles can be added to your existing paddles in the main seedbox to help break-up bridging of light fluffy seed across the seedbox discharge opening. See your nearest Land Pride dealer to order the correct kit for your seeder. 30251 313-503A Agitator Extension Kit, 48"...
  • Page 59 Small Seeds Attachment Refer to Figure 5-5: The Land Pride Small Seeds Attachment is an option made available to fit any Land Pride 48" or 72" Overseeder. The small seeds attachment is designed to meter various small seeds. It features a 0.23 bushel/foot profile which gives the OS1548 Small Seeds Attachment a 0.95 bushel...
  • Page 60 Chaincase, (knife drive) Fully enclosed oil bath style chain box with drain plug and vent plug. Shell Gadus S2 V2200 00 flowable grease Chaincase oil Land Pride part #821-045C (32 oz. bottle) (0.95 L) Rotor diameter 18" (45.7 cm) Rotor speed...
  • Page 61 (51.4 cm) 49 3/4" (1.26 m) OS1548 = 47 3/4" (1.21 m) OS1572 = 49" (1.24 m) OS1548 = 77 3/4" (1.97 m) OS1572 = 99" (2.51 m) 26728 Gauge Wheel Drive 11/28/18 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M...
  • Page 62 Prevents soil buildup on packer wheels in moist conditions. Drive chains are covered for safety, as well as keeping tree branches away to eliminate chain Covered drive chains jumping. Warranty 5 Years on gearbox. One year parts & labor. OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M 11/28/18...
  • Page 63 Unless cleaned regularly, this build-up can cause breakage of the seed cup Actual seeding rate is different than shaft. desired See “Adjustments”, Section 3, starting on page 22, for instructions on calculating seed rate. 11/28/18 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M...
  • Page 64 Non Driven Rotor End Flange 985 ft-lbs. (Use a spanner wrench to loosen) 7/16" Knife Mounting Bolts & Locknuts 68 ft-lbs Tire Inflation Chart Inflation Tire Size 8 1/2" x 18" 20 psi OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M 11/28/18...
  • Page 65 This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship.
  • Page 66 Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA www.landpride.com...

This manual is also suitable for:

Os1572