Download Print this page

Land Pride OS1548 Operator's Manual page 29

Overseeder
Hide thumbs Also See for OS1548:

Advertisement

Section 3: Adjustments
Number of Rear Roller Rotations For:
Model
1000 Sq.
No
1/10 Acre
OS1548
398
OS1572
265
Number of Gauge Wheel* Rotations For:
Model
1000 Sq.
No
1/10 Acre
OS1548
236
OS1572
157
* Seed rates listed in charts for gauge wheel units are based
on Overseeder having 18 x 8.50 x 8 turf tires with 20 psi.
g. Rotate rear roller the number of rotations noted in
the table above. Be sure to check the three feed
cups to make sure each cup has plenty of seed
coming into it.
h. Weigh the seed which has been metered out and
divide that weight by three to get the number of
pounds or kilograms per seed cup.
NOTE: If total weight for 3 seed cups is in
ounces, divide that weight by 48 instead of 3.
i. Next, multiply number of pounds or kilograms per
seed cup by the number of seed cups on the grass
seeds seedbox to arrive at weight "A" .
j. If Weight "A" is calculated based on:
1/10 acre, then "A" x 10 = lbs/acre
1000 sq ft, then "A" x 43.56 = lbs/acre
1000 sq ft, then "A" x 1 = lbs/1000 sq ft
1/20 hectare, then "A" x 20 = kg/hectare
100 sq meters, then "A" x 100 = kg/hectare
100 sq meters, then "A" x 10 = kg/1000 sq m
k. If calculated grass seed rate is different than the
suggested settings in the charts, then increase or
decrease the seed cup adjustment lever.
3. Repeat calibration procedure if the results of the
calibration vary greatly with the chart.
NOTE: Field conditions will affect seeding rates.
Check amount of seed being used by noting size of
area being seeded, amount of seed added to the
seeder, and level of seed in the seedbox.
It may be necessary to make minor adjustments to
the seeding rate if the seeder has been accurately
calibrated and is seeding more or less seed than
desired.
IMPORTANT: Do Not operate seed rate adjustment
lever at -0- setting. Seed cup damage may occur.
Do Not set door handles and seed rate adjustment
lever to the widest open position with seed in the box
unless complete clean out is desired.
11/28/18
Table of Contents
1/20
100
Ft.
Hectare
Sq. M
91
492
98.5
61
327
66
1/20
100
Ft.
Hectare
Sq. M
54
292
58
36
194
39
Four-Position
Door Handle
Seed
Cup
Drop
Tube
Seed Rate Adjustment Lever
DO NOT operate seeder with seed rate adjustment lever
set on 0.
Seed Rate Adjustment Lever
Figure 3-8
OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M
12858
25

Advertisement

loading

This manual is also suitable for:

Os1572