Paser UNICO DUAL PLUS Installation Manual

Release date: 21.11.17
UNIVERSAL adapter for the OEM steering wheel commands connection.
Its compatibility extends to a wide range of vehicles having CAN BUS - KBUS and Resistive protocols and to the radio models with listed in the radios table attached.
The functions are totally managed by a microprocessor able to self-recognize the steering wheel commands protocol.
The CAN BUS - KBUS protocol setting is managed in SELF-SELECTION.
The Resistive setting is made by following a simple procedure that assign to the unit the functions of the buttons available on the steering wheel.
The present unit allows the integrations in those vehicles in which are available different communication systems; for example, when the car has the steering wheel commands
Resistive and the services, such as lights, power ignition, odometer etc, in CAN BUS protocol.

CABLE WIRES DESCRIPTION

POS.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
UNICO DUAL has 4 dip switches. Dips 1 and 2 must be set before the installation. Dips 3 and 4 are necessary only to manage special func tions for some cars. It's important to
make the right dip switches setting in order that the unit works properly.
The information in this guide are purely for information purposes, therefore, are subject to change without notice.
At the time of publication the information is correct and reliable. However Paser can not be held responsible for any consequences resulting from errors or omissions in this manual.
Paser reserves the right to improve / change the product or manual without obligation to notify users.
UNICO DUAL PLUS
CANBUS-KBUS-RESISTIVE
INSTALLATION MANUAL
COLOUR
RED
BLACK
ORANGE
PINK
BLUE
GREY
VIOLET
GREEN/BLACK
LIGHT BLUE
PINK/WHITE
YELLOW/WHITE
YELLOW/BLACK
RED/BLUE
BROWN
GREY/BLACK
VIOLET/BLACK
GREEN
WHITE
BLUE/YELLOW
RED/GREY
RESISTIVE PROTOCOL
CAN BUS / K-BUS PROTOCOL
HYBRID PROFILE:
RESISTIVE STEERING WHEEL COMMANDS CANBUS SERVICES OUTPUTS
OPTIONS MANAGEMENT
UNIT SOFTWARE UPGRADING
SET THE DIP SWITCHES WITH UNICO DUAL NOT POWERED
ATTENTION! YOU ALWAYS MUST TO SET DIP 3 AND 4
IN POSITION "OFF" ONCE THE SETTING IS DONE
In case of radio Pioneer,
phone buttons are NOT managed!

DESCRIPTION

22 21 20
11 10 9
AUX 1 (WITH RESISTANCE 1.5k IN SERIES)
RADIO RESISTIVE OUTPUT
AUX 3 (WITH RESIST. 560 ohm TO THE GND)
AUX 4 (WITH RESIST. 3.3 k TO THE GND)
AUX 5 (WITH RESIST. 1 k TO THE GND)
AUX 6 (WITH RESIST. 4,7 k TO THE GND)
AUX 7 (WITH RESIST. 220 ohm TO GND)

DIP SWITCHES

ATTENTION!
1 / 4
19 18 17 16 15
8 7 6 5 4
FUNCTION
12V
GND
LIGHTS OUTPUT
RESISTIVE INPUT
REVERSE OUTPUT
HANDBRAKE OUTPUT
INFRARED CATHODE
INFRARED ANHODE
RADIO CODE OUTPUT
GND
K-BUS
CAN H
CAN L
STK OUT
ODOMETER
DIP 1 ON
DIP 1 OFF
DIP 1 and 2 ON
DIP 3 ON
DIP 4 ON
rev 1.0 17
30 m
14 13 12
3 2 1