Maintenance And Care - ULTIMATE SPEED ULGD 10 A1 Translation Of The Original Instructions

Using the device / Maintenance and care
instructions for your vehicle, if you
want to use this program to buffer
your vehicle when changing a
battery.
Program 10
24V
(27.2 V / 1.5 A)
Supply program 27.2 V / 1.5 A
max.
Press the program selector button
ten times to select Program 10.
The and
24V
2
shown on the LC display.
For use as a 24 V voltage supply
or for buffer maintenance charg-
ing, where 100% battery power is
necessary. Das supply program will
work without a time limit.
Please contact the vehicle manufac-
turer and read the operating instruc-
tions for your vehicle, if you want
to use this program to buffer your
vehicle when changing a battery.
Trickle charging
In programs 1 to 8, the device
has an automatic trickle charging
procedure. Depending on the drop
in voltage in the battery – through
self-discharge – the charger reacts
22 GB
8
symbols are
7
with different levels of charging
current. The battery can remain con-
nected to the charger over a longer
period of time.
Device protection function
As soon as a different situation
occurs, such as a short circuit,
critical drop in voltage during the
charging process, open circuit or
reversed connection of the output
terminals, the battery charger
switches off automatically. The
electronic system resets the system
immediately to its home position,
in order to avoid damage. If the
device should become too hot
during charging, the output power is
automatically reduced. This protects
the device from damage.
z Maintenance and care
Always pull the mains cable
„
from the socket before you
perform any work on the vehicle
battery charger.
1
The device is maintenance-free.
„
Deactivate the device. Clean the
metal and plastic surfaces of the
device with a dry cloth.
Never use any solvents or other
„
aggressive cleaning agents.
1
12