Hydraulic Support Leg; Jack Up The Sprayer - Hardi COMMANDER 4500 Operator's Manual

Hide thumbs Also See for COMMANDER 4500:
Table of Contents

Advertisement

4 - Sprayer setup

Hydraulic support leg

The hydraulic support leg is driven by a separate double acting hydraulic outlet on the tractor. The support leg is stored in
its retracted position when the sprayer is attached to the tractor.
To raise/lower the support legs
1. Unlock the leg by turning the securing grip to position (A).
2. Use the tractor's hydraulic lever to raise or lower the support leg.
3. Secure the leg by turning the grip to position (B).
DANGER! Do never leave the sprayer standing unlocked on the
support leg. Always double check that the lever is in position (B).

Jack up the sprayer

When the sprayer needs wheel mounting, wheel changing, or wheel
bearing changing etc. then jack up the sprayer under the axle as shown.
DANGER! Be sure to place sprayer at level and firm ground to
avoid sprayer falling down from the jack.
ATTENTION! It is good practice to use stop wedges at the
opposite wheel!
34

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Commander 5500Commander 7000

Table of Contents