ResMed Nox T3s How To Use Manual page 7

Configure a recording
When the pairing is successful, a green checkmark will appear.
The oximeter will now switch to wake up mode and will turn
on again when the Nox T3s recorder starts a study (either
manual start or scheduled start).
Click Next to continue.
When the pairing is unsuccessful, a red X-mark appears.
If failing, follow the instructions below:
• Check the BDA number of the device and make sure it matches the
number on the oximeter.
• Restart the oximeter by removing the batteries and inserting
batteries again to the oximeter. Then press the grey activation button
to turn on the device. Resume the pairing process.
• Restart the Nox T3s by unplugging the Nox T3s from the computer
and plugging it back in again. Resume the pairing process.
Once the pairing is successful, click Next to continue.
7