Table of Contents
Advertisement
Troubleshooting: Reset a Nonin 3150 BLE oximeter
If the Nonin 3150 oximeter does not perform as expected, it is recommended that you follow the reset process described below:
1.
Remove the two batteries and disconnect the probe from the oximeter.
2.
Wait for 1 minute and reinsert the batteries.
3.
Press and hold down the grey activation button for 3 seconds until the screen turns on.
4.
Reconnect the probe.
5.
The device is now reset.
48
- Quick Links:
- Nox T3S System
- Patient Hook-Up
Hide quick links:
Advertisement
Table of Contents
