ResMed Nox T3s How To Use Manual page 19

Patient hook-up
• Therapy device option: pressure tubing installation
Make sure you use an appropriate recording type.
Equipment needed:
- Pressure tubing (PN 7072092)
- Nasal cannula filter (PN 7072097)
- Mask adapter (PN 26915)
Connect the pressure tubing to the mask and the Nox device
1 - Insert a filter into the pressure input of the Nox T3s, where you would usually insert the nasal cannula.
2 - Screw the male luer-lock connector of the pressure tubing into the filter.
3 - Connect the female luer-lock connector of the tubing to the pressure port of the mask adapter.
Set-up picture:
1
2
3
19