Table of Contents
Advertisement
PC 2150 15.0" All-in-One PANEL PC User's Manual
This chapter describes the system installation and the cable
connection to the I/O connectors. See system board User's Manual
that came with your PANEL PC packaging for more details. Sections
in this chapter includes
CPU
DRAM
HDD
3 x Serial
Ports
Parallel Port
The PC 2150 has a Pentium III little board with a free ISA and
PCI slots inside the riser card assembly. It already builds in a Pentium
III CPU, relevant DRAM and a 3.5" HDD (or Dual 2.5" optional HDD).
These are all standard and the system is ready to play. System
performance can be increased by upgrading to a higher performance
CPU, higher capacity DRAM modules and hard disk drive. The user
can use the I/O ports located at the backside of the chassis to connect
external peripheral devices, such as a monitor, serial devices, parallel
printer...etc.
NOTE:
Make sure the power cord is disconnected before any
installation. To install any internal device such as CPU,
DRAM and HDD, take out the rear chassis cover first.
System Installation
C h a p t e r
System Installation
VGA
Ethernet
Digital I/O
Keyboard
PS/2 Mouse
3
Expansion
Slot
System O/S
and
Software
Installation
11
Advertisement
Table of Contents
