Table of Contents
Advertisement
PC 2150 15.0" All-in-One PANEL PC User's Manual
3.4
Parallel Port
The printer interface is a 25-pin D-SUB connector. To connect any
parallel device, just plug in the device connector to the 25-pin D-SUB.
3.5
VGA
The PC 2150 has an analog RGB interface connector. It is
able to connect to an expansion CRT monitor, and the system can
display on both the flat panel and the CRT simultaneously.
3.6
Ethernet
The PC 2150 provides an NE2000 compatible Ethernet
(RJ-45) interface. For network connection, just plug in one cable end
of the PC 2150 100-Base-T Hub into the standard RJ-45
connector. The pin assignment of the RJ-45 is listed below;
1 2 3 4 5 6 7 8
RJ-45
System Installation
RJ-45 Connector Pin Assignment
Pin
Description
1
Tx+ (Data transmission positive)
2
Tx- (Data transmission negative)
3
Rx+(Data reception positive)
6
Rx- (Data reception negative)
others
Not use
19
Advertisement
Table of Contents
