1. Manuals
  2. Brands
  3. Acnodes Manuals
  4. Touch Panel
  5. PC 8150
  6. User manual

Acnodes PC 8150 User Manual

15” tft touch panel computer
Hide thumbs Also See for PC 8150:
Table of Contents

Advertisement

Quick Links

Download this manual
PC 8150
15" TFT Touch Panel Computer
User's Manual

Advertisement

Table of Contents
loading

Related Manuals for Acnodes PC 8150

Summary of Contents for Acnodes PC 8150

  • Page 1 PC 8150 15” TFT Touch Panel Computer User’s Manual...
  • Page 3 ACNODES assumes no responsibility for any inaccuracies that may be contained in this document. ACNODES makes no commitment to update or to keep current the information contained in this manual. ACNODES reserves the right to make improvements to this document and/or product at any time and without notice.

  • Page 4: Safety Approvals

    CE Marking FCC Class A FCC Compliance This equipment has been tested and complies with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 5: Safety Precautions

    5. Turn OFF the system power before cleaning. Clean the system using a cloth only. Do not spray any liquid cleaner directly onto the screen. The PC 8150 may come with or w/o a touch screen. Although the touch screen is chemical resistant, it is recommended that you spray the liquid cleaner on a cloth first before wiping the screen.
  • Page 6 Trademarks Acknowledgments ACNODES is a trademark of ACNODES Co., Ltd. IBM, PC/AT, PS/2, VGA are trademarks of International Business Machines Corporation. Intel and Pentium are trademarks of Intel Corporation. MS-DOS, Microsoft C and Quick BASIC are trademarks of Microsoft Corporation.
  • Page 7 This page does not contain any information.

  • Page 8: Table Of Contents

    Disclaimers...ii Safety Approvals...iii FCC Compliance ...iii Safety Precautions ... iv C h a p t e r 1 ...1 Introduction ...1 General Description ...1 Specifications ...2 1.2.1 Main CPU board ... 2 1.2.2 I/O System ... 2 1.2.3 System Specification ... 3 Dimensions ...4 Front View and I/O Outlets...5 1.4.1...
  • Page 9 Driver Installation ...19 System...19 Touch Screen...20 3.2.1 Specification ... 20 3.2.2 Driver Installation- Windows Vista/XP ... 21 3.2.3 Driver Installation- DOS ... 23 A p p e n d i x A ...28 EMBEDDED BOARD BIOS Setup...28 Entering Setup ...28 Control Keys ...29 Getting Help ...29 The Main Menu ...30...

  • Page 11: Chapter 1

    General Description System Specification Dimensions Back View & I/O Outlets Package List General Description The PC 8150 is a TFT Touch Panel PC which equipped with Intel Core processors paradigmatic industrial panel complete full-function and extreme cost-effective industrial HMI controller.

  • Page 12: Specifications

    PC 8150 User’s Manual Specifications 1.2.1 Main CPU board CPU: Socket M (478-pin) for Intel Core Solo Processor with 533/667MHz. System Chipset: Intel BIOS: Phoenix-Award 4Mbit with RPL/PXE LAN boot ROM Smart View and Customer CMOS Backup System Memory: 2 x 240-pin DDR2 DIMM...

  • Page 13: System Specification

    O° to 45°C ; Relative umidity:50% Relative humidity: 10% to 85% @ 40° C, non-condensing Altitude: 10,000 ft. (3,000 meters) Vibration (operating): 5 to 500 Hz, 1 G random Shock (operating): 10 G peak acceleration (11 msec. duration) Introduction PC 8150 User’s Manual...

  • Page 14: Dimensions

    PC 8150 User’s Manual Dimensions The following diagrams show the dimensions and outlines of PC 8150. Introduction...

  • Page 15: Front View And I/O Outlets

    PC 8150 User’s Manual 1.4 Front View and I/O Outlets 1.4.1 Front View The figure below shows the features and controls on the PC 8150 front bezel. SEL- SEL+ Backlight ON/OFF Introduction...

  • Page 16: I/O Outlet

    PC 8150 User’s Manual 1.4.2 I/O Outlet The following figure shows the I/O locations of the PC 8150. Introduction...

  • Page 18: Package List

    PC 8150 User’s Manual Package list When you receive the PC 8150 there are following items in the package. If you can not find it, please contact ACNODES distributors. 1. PC 8150 x 1 2. AC power cord x 1 3.

  • Page 20: Chapter 2

    PC 8150 User’s Manual The PC 8150 provides lots of flexible ways for user to select different configuration such as CPU, Hard Disk and more. The chapter will show you how to install the hardware. It includes: DRAM Hard Disk...

  • Page 21: Cpu And Dram Installation

    PC 8150 User’s Manual CPU and DRAM Installation The standard PC 8150 system is designed for Core 2 Duo level CPUs. The CPU board provides two 240-pin DDR2 DIMM socket that supports system memory up to 3GB. When upgrading the CPU, DRAM, please refer to the following instructions and illustration: 1.
  • Page 22 PC 8150 User’s Manual 2. Install the CPU and DDR DRAM in the PC 8150. Hardware Installation...

  • Page 23: Hdd Installation

    HDD Installation The PC 8150 offers a convenient drive bay module for users to install HDD. The PC 8150 offers one 3.5” HDD drive for users to install. If you want to install one or two 2.5” HDD, the PC 8150 also provides the 3.5”...
  • Page 24 PC 8150 User’s Manual 3. Installation complete. Hardware Installation...
  • Page 25 PC 8150 User’s Manual In addition, installing the 2.5” HDD, please follow the steps: 1. Changing HDD rubber from 3.5” HDD bracket to 2.5” HDD bracket. 2. Installation complete. Hardware Installation...

  • Page 26: Serial Port Interface

    TXD, Transmit data DTR, Data terminal ready GND, ground The PC 8150 has an analog RGB interface connector. It is able to connect to an expansion CRT monitor, and the system can display on both the flat panel and the CRT simultaneously.

  • Page 27: Mountings: Panel / Wall / Rack / Vesa / Desktop Mount

    PC 8150 User’s Manual 2.6 Mountings: Panel / Wall / Rack / VESA / Desktop mount There are four application options for the PC 8150, Panel / Wall / Rack & VESA mountings. 2.6.1 Panel Mount The PC 8150 is designed for panel mount application. To mount the PC 8150, the standard set of mounting kit (included in the system packaging) is needed.

  • Page 28: Wall Mount

    PC 8150 User’s Manual 2.6.2 Wall Mount The PC 8150 is designed for Wall mount application. The wall mount kit is optional. Please refer to the following figure. 1. Screw 6 screws to fix wall mount bracket. 2. Complete. Hardware Installation...

  • Page 29: Rack Mount

    PC 8150 User’s Manual 2.6.3 Rack Mount The PC 8150 also support rack mount. The rack mount kit is optional. Please refer to the following procedure. 1. Screw 5 screws each side. 2. Complete. Hardware Installation...

  • Page 30: Vesa Mount

    PC 8150 User’s Manual 2.6.4 VESA Mount The PC 8150 provides two ways for VESA mount: 75x75 mm and 100x100 mm. The VESA mount bracket is the same as wall mount bracket. Please refer to the following steps. 1. Assemble wall / VESA mount bracket.

  • Page 32: Driver Installation

    PC 8150 User’s Manual System PC 8150 could support with Windows Vista/XP. To facilitate installation system driver, you should read the instructions in this chapter carefully before you attempt installation. Panel series\PC 8150\Driver Select all files and follow the install procedure and press OK.

  • Page 33: Touch Screen

    5V: 23mA+ i where (i = v/touch screen sheet R) 6.0 x 2.0 cm Board Size: Portrait: Support 90 ESD device option Static Protection: Touch activate indication LED on board Others: Driver Installation PC 8150 User’s Manual to 270 screen rotation...

  • Page 34: Driver Installation- Windows Vista/Xp

    PC 8150 User’s Manual 3.2.2 Driver Installation- Windows Vista/XP The touch screen of PC 8150 provides a driver for use with Windows Vista/XP. To facilitate installation of the touch screen driver, you should read the instructions in this chapter carefully before you attempt installation.
  • Page 35 PC 8150 User’s Manual Select the “Standard Calibrate” tab Driver Installation...

  • Page 36: Driver Installation- Dos

    PC 8150 User’s Manual Calibration: To adjust the display with touch panel, click “Calibration” and follow the calibrate point to do calibration; there are five points on screen for calibration. Press OK. 3.2.3 Driver Installation- DOS Using “INSTALL.EXE” software driver.
  • Page 37 After calibration, the data is shown in the screen, press any key to continue the progress. 3. After the calibration, suggest you to test touch screen and display Driver Installation PC 8150 User’s Manual PMDETECT (e.g.
  • Page 38 PC 8150 User’s Manual mapped results by choose “3” DRAWING TEST under PM.BAT Initializing the PenMount driver If you don’t have the initialization commands in AUTOEXEC.BAT, initialize PenMount C:\PENMOUNT\PMINIT) controller before you use the PenMount Touch Screen. The display will show the initialization message: PenMount V7.06 Copyright(c) SALT International Corp.
  • Page 39 PC 8150 User’s Manual This page does not contain any information. Driver Installation...

  • Page 42: Appendix A

    PC 8150 User’s Manual EMBEDDED BOARD BIOS Setup Appendix A describes the different settings available in the Award BIOS that comes with the EMBEDDED BOARD CPU card. Also, the instructions on how to set up the BIOS configuration are contained in this chapter.

  • Page 43: Control Keys

    Status Page Setup Menu/Option Page Setup Menu Press <F1> to pop out a small Help window that provides the description of using appropriate keys and possible selections for highlighted items. Press <F1> or <Esc> to exit the Help Window. Appendix PC 8150 User’s Manual...

  • Page 44: The Main Menu

    PC 8150 User’s Manual The Main Menu Once you enter the Award BIOS CMOS Setup Utility, the Main Menu appears on the screen. In the Main Menu, there are several Setup functions and a couple of Exit options for your selection. Use arrow keys to select the Setup Page you intend to configure then press <Enter>...

  • Page 45: Standard Cmos Setup Menu

    It can be keyed with the numerical/ function key, from 1 date to 31. It is from January to December. month It shows the current year of BIOS. year Time This item shows current time of your system with the format Appendix PC 8150 User ’s Manual...
  • Page 46 PC 8150 User ’s Manual <hour> <minute> <second>. The time is calculated based on the 24-hour military-time clock. For example, 1 p.m. is 13:00:00. IDE Primary Master/Primary Slave These items identify the types of each IDE channel installed in the computer.
  • Page 47 Diskette The system booting will not stop for a keyboard or All, But disk error; it will stop for other errors. Disk/Key Press <Esc> to return to the Main Menu page. Appendix PC 8150 User’s Manual...

  • Page 48: Advanced Bios Features

    PC 8150 User’s Manual Advanced BIOS Features This section allows you to configure and improve your system, to set up some system features according to your preference. CPU Feature Scroll to this item and press <Enter> to view the CPU Feature sub menu.
  • Page 49 If set as Enabled, BIOS will shorten or skip some check items during POST. The default setting is “Enabled”. Enabled Disabled Appendix PC 8150 User’s Manual Enable cache Disable cache Enable Quick POST Normal POST...
  • Page 50 PC 8150 User’s Manual First/Second/Third Boot Device These items let you select the 1st, 2nd, and 3rd devices that the system will search for during its boot-up sequence. The wide range of selection includes Floppy, LS120, ZIP100, HDD0~3, SCSI, and CDROM.
  • Page 51 The default value is “250”. 1000 Security Option This item allows you to limit access to the system and Setup, or just to Setup. The default value is “Setup”. Appendix PC 8150 User’s Manual 250 msec 500 msec 750 msec 1000 msec...
  • Page 52 PC 8150 User’s Manual If a wrong password is entered at the prompt, the system System will not boot, the access to Setup will be denied, either. If a wrong password is entered at the prompt, the system Setup will boot, but the access to Setup will be denied.

  • Page 53: Advanced Chipset Features

    Auto. The board designer should set the values in this field, depending on the DRAM installed. Do not change the values in this field unless you change specifications of the installed DRAM or the installed CPU. System BIOS Cacheable Appendix PC 8150 User’s Manual...
  • Page 54 PC 8150 User’s Manual Selecting Enabled allows caching of the system BIOS ROM at F0000h-FFFFFh, resulting in better system performance. However, if any program writes to this memory area, a system error may result. The default value is “Disabled”. Video BIOS Cacheable This item allows you to change the Video BIOS location from ROM to RAM.

  • Page 55: Integrated Peripherals

    This section allows you to configure your SuperIO Device, IDE Function and Onboard Device. OnChip IDE Device Scroll to this item and press <Enter> to view the sub menu OnChip IDE Device. IDE HDD Block Mode Appendix PC 8150 User’s Manual...
  • Page 56 PC 8150 User’s Manual Block mode is also called block transfer, multiple commands, or multiple sector read/write. If your IDE hard drive supports block mode (most new drives do), select Enabled for automatic detection of the optimal number of block read/writes per sector the drive can support.
  • Page 57 Use this item to enable or disable the onboard AC’97 Audio function. Press <Esc> to return to the Integrated Peripherals page. Super IO Device Scroll to this item and press <Enter> to view the sub menu Super IO Device. Appendix PC 8150 User’s Manual...
  • Page 58 PC 8150 User’s Manual Onboard FDC Controller Select Enabled if your system has a floppy disk controller (FDC) installed on the system board and you wish to use it. If you install and-in FDC or the system has no floppy drive, select Disabled in this field.

  • Page 59: Power Management Setup

    Standby mode in S1 (POS) or S3 (STR) fashion through the setting of this field. Options are: [S1(POS)] The S1 sleep mode is a low power state. In this state, no system context is lost (CPU or chipset) and Appendix PC 8150 User’s Manual...
  • Page 60 PC 8150 User’s Manual hardware maintains all system context. [S3(STR)] The S3 sleep mode is a lower power state where the information of system configuration and open applications/files is saved to main memory that remains powered while most other hardware components turn off to save energy.
  • Page 61 The default value is “Enabled”. Resume by Alarm If enable this item, the system can automatically resume after a fixed time in accordance with the system’s RTC (realtime clock). Press <Esc> to return to the Main Menu page. Appendix PC 8150 User’s Manual...

  • Page 62: Pnp/Pci Configuration Setup

    PC 8150 User’s Manual A.10 PnP/PCI Configuration Setup This section describes the configuration of PCI (Personal Computer Interconnect) bus system, which allows I/O devices to operate at speeds close to the CPU speed while communicating with other important components. This section covers very technical items that only experienced users could change default settings.

  • Page 63: Pc Health Status

    PCI/VGA cannot work with a MPEG ISA/VESA Card. A.11 PC Health Status This section supports hardware monitering that lets you monitor those parameters for critical voltages, temperatures and fan speed of the board. Current CPU Temperature Appendix PC 8150 User’s Manual...

  • Page 64: Frequency/Voltage Control

    PC 8150 User’s Manual These read-only fields reflect the functions of the hardware thermal sensor that monitors the chip blocks and system temperatures to ensure the system is stable. A.12 Frequency/Voltage Control This section is to control the CPU frequency and Supply Voltage, DIMM OverVoltage and AGP voltage.

  • Page 65: Set Supervisor/User Password

    PC 8150 User’s Manual To load CMOS SRAM with SETUP default values, please enter “Y”. If not, please enter “N”. A.14 Set Supervisor/User Password You can set a supervisor or user password, or both of them. The differences between them are:...
  • Page 66 PC 8150 User’s Manual Supervisor password: You can enter and change the options on the setup menu. User password: You can just enter, but have no right to change the options on the setup menu. When you select this function, the following message will appear at the center of the screen to assist you in creating a password.

  • Page 67: Save & Exit Setup

    PC 8150 User’s Manual To disable the password, just press <Enter> when you are prompted to enter a password. A message will confirm the password is getting disabled. Once the password is disabled, the system will boot and you can enter Setup freely.

  • Page 68: Exit Without Saving

    PC 8150 User’s Manual A.16 Exit Without Saving Select this option to exit the Setup utility without saving changes you have made in this session. Type “Y”, and it will quit the Setup utility without saving your modifications. Type “N” to return to the Setup utility.

  • Page 69: Appendix B

    The +3.3V and +5V total output shall not exceed 61 watts. The +3.3.V, +5V, and +12V total output shall not exceed 160 watts and the total output for this subject power supply is 180 watts. Appendix PC 8150 User’s Manual Appendix B Ripple/Noise 50mV 0.3A...
  • Page 70 PC 8150 User’s Manual LOAD CAPACITY SPECIFICATIONS The cross regulation defined as follows, the voltage regulation limits DC include DC Output ripple & noise. LOAD +3.3V ALL MAX HHHH 4.5A +5V MAX LHLL 0.3A other MIN +3.3V MAX HLLL 16.8 A...
  • Page 71 PC 8150 User’s Manual SHORT CIRCUIT PROTECTION Output short circuit is defined to be a short circuit load of less than 0.1 ohm. In the event of an output short circuit condition on +3.3V, +5V or +12V output, the power supply will shutdown and latch off. The power...

  • Page 72: Efficiency

    PC 8150 User’s Manual TTL signal asserted (high state): greater than 4.75V while sourcing 500uA. High state output impedance: less or equal to 1Kohm from output to common. POWER GOOD @ 115/230V,FULL LOAD POWER FAIL @115/230V, FULL LOAD B.1.2 EFFICIENCY...

Table of Contents