PC 2150 15.0" All-in-One PANEL PC User's Manual
1. Remove the 3 screws securing the riser card assembly's
back cover. Take off the cover by sliding it outward and
pulling it upwards as pointed by the arrows. If your
system does not come with a riser card assembly,
proceed to step 2.
2. Another 6 screws, located on the upper perimeter (3) and
lower half (3), needs to be removed. These screws are the
screws bolting the system's rear cover to the main unit.
3. You may now take off the system's rear cover (along with
the riser card assembly).
4. See the illustration for the exact locations of your HDD,
CPU and DRAM sockets.
5. After making the necessary upgrades or modifications to
your HDD, CPU, and DRAM, restore the system back to its
original form by following instructions 4 to 1.
System Installation
13