Parameters - Siemens SIRIUS 3RA6 System Manual
Load feeder compact starter
Hide thumbs
Also See for SIRIUS 3RA6:
- System manual (182 pages) ,
- Operating instructions manual (11 pages) ,
- System manual (320 pages)
Table of Contents
Advertisement
6.4
Parameters
Parameters
The following parameters can be set:
● Type of starter
● Starter available
● Operation at Preset <> Actual Configuration
● Operator panel available
Notes on parameter assignment
Parameters can only be assisgned when the compact starters do not receive any control
signals from the bus.
The parameterization is saved in the compact starter of a starter group connected to the
IO-Link master via the removable terminal.
Danger of uncontrolled motor start-up
The preset configuration of a compact starter group is saved by the compact starter
connected to the IO-Link master via the removable terminal.
When this compact starter is replaced, you must ensure that the preset configuration is
saved in the new compact starter. In the event of a replacement, the preset configuration
can either be transferred to the new device with the "Port Configuration Tool", or it can be
copied from the old compact starter to the new compact starter with the help of the function
block "IO-Link Call".
SIRIUS 3RA6 compact starter
System Manual, 08/2018, NEB560060102000/RS-AB/007
WARNING
3RA64/3RA65 compact starter with IO-Link
6.4 Parameters
111
Advertisement
Table of Contents
