Siemens SIRIUS 3RA6 System Manual page 47

No. Display element/operator control
(4) "Current setting I
e
(5) "Overload trip class" selector
switch
(6) "Overload protection function" test
button
(7) Actuator
(8) Connection point for auxiliary
switch block
(9) Control circuit terminals
(10) Main circuit terminals
(11) "Main contacts closed" LED display ON I
(12) "Control supply voltage present"
LED display
(13) "Short-circuit protection function"
test button
(14) "Malfunction" mechanical display
(15) "Control supply voltage" connection A1+, A2-
You can find detailed information on the precise device statuses in "Diagnostics
1)
(Page 87)".
SIRIUS 3RA6 compact starter
System Manual, 08/2018, NEB560060102000/RS-AB/007
Marking
" setting wheel Setting ranges
depending on the
article number:
0.1 - 0.4 A
•
0.32 - 1.25 A
•
1 - 4 A
•
3 - 12 A
•
8 - 32 A
•
CLASS 10/20
TEST
•
•
TRIPPED
•
—
—
—
A1/A2
TEST I>>
RLT 0%
Explanation
For selecting the current setting I
For selecting the overload trip class 10E or 20E.
Press this button for at least 5 secs to test the overload
protection function.
Requirement:
Current must flow on the main conducting paths.
•
OFF OFF: Compact starter is out of service.
•
READY OFF and eye for padlock pulled out: Compact
•
starter is out of service and secured against
unauthorized closing.
READY and "Overload trip" display (1) not white:
•
Compact starter is ready.
READY and "Overload trip" display (1) white:
•
Compact starter not ready (tripped).
TRIPPED: Short-circuit tripped or malfunction
•
exists.
—
—
—
Green: Main contacts are closed.
•
Off: Main contacts are open.
•
Green: Control supply voltage is present.
•
Off: Control supply voltage not present.
•
Press this button to test the short-circuit protection
function.
No display: Device is OK
•
White display: Malfunctions detected. Device must
•
be replaced.
—
3RA61/3RA62 compact starter
5.2 Description of the hardware
1)
.
e
47