Acyclic Data Exchange With The Io_Link_Master Function Block - Siemens SIRIUS 3RA6 System Manual
Load feeder compact starter
Hide thumbs
Also See for SIRIUS 3RA6:
- System manual (182 pages) ,
- Operating instructions manual (11 pages) ,
- System manual (320 pages)
Table of Contents
Advertisement
6.3.6
Acyclic data exchange with the IO_LINK_MASTER function block
For acyclic data exchange, the IO_LINK_MASTER function block is available as a download
for controllers of the S7 families.
With the help of this block, you can back up or restore the device parameters and settings of
an IO-Link communication module (e.g. ET 200SP CM 4xIO-Link) via the S7 program.
Requirement
● Install the "IO_LINK_MASTER" function block.
You can download the IO_LINK_DEVIDE function block and the description from the
Internet (https://support.industry.siemens.com/cs/ww/en/view/82981502).
Procedure when using the IO_LINK_MASTER function block
1. Copy the IO_LINK_MASTER function block (including data block DB10) to a STEP 7
project.
2. Use the IO_LINK_MASTER function block as described in the documentation.
3. You can find an application example of how to use the IO-Link masters with the
IO_LINK_MASTER function block on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/90529409).
SIRIUS 3RA6 compact starter
System Manual, 08/2018, NEB560060102000/RS-AB/007
3RA64/3RA65 compact starter with IO-Link
6.3 Configuring
107
Advertisement
Table of Contents
