Download Print this page

Operation - Sharp FP-J40E Operation Manual

Advertisement

OPERATION

START/STOP
START
HAZE
The unit operates at HIGH fan speed for 60 minutes and then alternates between Low and High level for 20 minutes
each.
START
FAN SPEED
AUTO
SLEEP
OFF TIMER
Select the length of time you want, with the main unit on. The main unit automatically stops once the selected time is
reached.
(with the main unit ON)
OM_FP-J40E_40L_EN.indd
6
STOP
10 minutes: Max High fan level
50 minutes: High fan level
20 minutes: Low fan level
20 minutes: High fan level
NOTE
AUTO
The fan speed is automatically switched depending on the amount of
impurities in the air.
The sensors detect impurities for efficient air purfication.
SLEEP
The unit will operate very quietly, and the fan speed is automatically
switched depending on the amount of impurities in the air.
Cleanliness Monitor/Plasmaclustor Ion Light go off automatically.
MED
MAX
Even though the indicator is off, Plasmacluster Ion is dispersed into air
unless Plasmacluster Ion is turned off by
2h
4h
2hour
4hour
8hour
• Select the desired fan speed.
•When the main unit starts operation, the operation
starts in the previous mode it was operated in.
NOTE
• The Plasmacluster Ion can not be turnes "OFF".
• It is possible to switch this mode to another while
operating. However, the HAZE mode will not func-
tion after switching mode.
8h
OFF
CANCELLATION
EN-6
2018/06/25
11:43:41

Hide quick links:

Advertisement

loading
Need help?

Need help?

Do you have a question about the FP-J40E and is the answer not in the manual?

This manual is also suitable for:

Fp-j40lFp-j40m